diff options
Diffstat (limited to 'Source/3rdParty/Box2D/Dynamics/Joints')
24 files changed, 0 insertions, 6123 deletions
diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2DistanceJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2DistanceJoint.cpp deleted file mode 100644 index 126133c..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2DistanceJoint.cpp +++ /dev/null @@ -1,260 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2DistanceJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// 1-D constrained system -// m (v2 - v1) = lambda -// v2 + (beta/h) * x1 + gamma * lambda = 0, gamma has units of inverse mass. -// x2 = x1 + h * v2 - -// 1-D mass-damper-spring system -// m (v2 - v1) + h * d * v2 + h * k * - -// C = norm(p2 - p1) - L -// u = (p2 - p1) / norm(p2 - p1) -// Cdot = dot(u, v2 + cross(w2, r2) - v1 - cross(w1, r1)) -// J = [-u -cross(r1, u) u cross(r2, u)] -// K = J * invM * JT -// = invMass1 + invI1 * cross(r1, u)^2 + invMass2 + invI2 * cross(r2, u)^2 - -void b2DistanceJointDef::Initialize(b2Body* b1, b2Body* b2, - const b2Vec2& anchor1, const b2Vec2& anchor2) -{ - bodyA = b1; - bodyB = b2; - localAnchorA = bodyA->GetLocalPoint(anchor1); - localAnchorB = bodyB->GetLocalPoint(anchor2); - b2Vec2 d = anchor2 - anchor1; - length = d.Length(); -} - -b2DistanceJoint::b2DistanceJoint(const b2DistanceJointDef* def) -: b2Joint(def) -{ - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - m_length = def->length; - m_frequencyHz = def->frequencyHz; - m_dampingRatio = def->dampingRatio; - m_impulse = 0.0f; - m_gamma = 0.0f; - m_bias = 0.0f; -} - -void b2DistanceJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - m_u = cB + m_rB - cA - m_rA; - - // Handle singularity. - float32 length = m_u.Length(); - if (length > b2_linearSlop) - { - m_u *= 1.0f / length; - } - else - { - m_u.Set(0.0f, 0.0f); - } - - float32 crAu = b2Cross(m_rA, m_u); - float32 crBu = b2Cross(m_rB, m_u); - float32 invMass = m_invMassA + m_invIA * crAu * crAu + m_invMassB + m_invIB * crBu * crBu; - - // Compute the effective mass matrix. - m_mass = invMass != 0.0f ? 1.0f / invMass : 0.0f; - - if (m_frequencyHz > 0.0f) - { - float32 C = length - m_length; - - // Frequency - float32 omega = 2.0f * b2_pi * m_frequencyHz; - - // Damping coefficient - float32 d = 2.0f * m_mass * m_dampingRatio * omega; - - // Spring stiffness - float32 k = m_mass * omega * omega; - - // magic formulas - float32 h = data.step.dt; - m_gamma = h * (d + h * k); - m_gamma = m_gamma != 0.0f ? 1.0f / m_gamma : 0.0f; - m_bias = C * h * k * m_gamma; - - invMass += m_gamma; - m_mass = invMass != 0.0f ? 1.0f / invMass : 0.0f; - } - else - { - m_gamma = 0.0f; - m_bias = 0.0f; - } - - if (data.step.warmStarting) - { - // Scale the impulse to support a variable time step. - m_impulse *= data.step.dtRatio; - - b2Vec2 P = m_impulse * m_u; - vA -= m_invMassA * P; - wA -= m_invIA * b2Cross(m_rA, P); - vB += m_invMassB * P; - wB += m_invIB * b2Cross(m_rB, P); - } - else - { - m_impulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2DistanceJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - // Cdot = dot(u, v + cross(w, r)) - b2Vec2 vpA = vA + b2Cross(wA, m_rA); - b2Vec2 vpB = vB + b2Cross(wB, m_rB); - float32 Cdot = b2Dot(m_u, vpB - vpA); - - float32 impulse = -m_mass * (Cdot + m_bias + m_gamma * m_impulse); - m_impulse += impulse; - - b2Vec2 P = impulse * m_u; - vA -= m_invMassA * P; - wA -= m_invIA * b2Cross(m_rA, P); - vB += m_invMassB * P; - wB += m_invIB * b2Cross(m_rB, P); - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2DistanceJoint::SolvePositionConstraints(const b2SolverData& data) -{ - if (m_frequencyHz > 0.0f) - { - // There is no position correction for soft distance constraints. - return true; - } - - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - - b2Rot qA(aA), qB(aB); - - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - b2Vec2 u = cB + rB - cA - rA; - - float32 length = u.Normalize(); - float32 C = length - m_length; - C = b2Clamp(C, -b2_maxLinearCorrection, b2_maxLinearCorrection); - - float32 impulse = -m_mass * C; - b2Vec2 P = impulse * u; - - cA -= m_invMassA * P; - aA -= m_invIA * b2Cross(rA, P); - cB += m_invMassB * P; - aB += m_invIB * b2Cross(rB, P); - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - - return b2Abs(C) < b2_linearSlop; -} - -b2Vec2 b2DistanceJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2DistanceJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2DistanceJoint::GetReactionForce(float32 inv_dt) const -{ - b2Vec2 F = (inv_dt * m_impulse) * m_u; - return F; -} - -float32 b2DistanceJoint::GetReactionTorque(float32 inv_dt) const -{ - B2_NOT_USED(inv_dt); - return 0.0f; -} - -void b2DistanceJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2DistanceJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.length = %.15lef;\n", m_length); - b2Log(" jd.frequencyHz = %.15lef;\n", m_frequencyHz); - b2Log(" jd.dampingRatio = %.15lef;\n", m_dampingRatio); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2DistanceJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2DistanceJoint.h deleted file mode 100644 index ba59210..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2DistanceJoint.h +++ /dev/null @@ -1,169 +0,0 @@ -/* -* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_DISTANCE_JOINT_H -#define B2_DISTANCE_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Distance joint definition. This requires defining an -/// anchor point on both bodies and the non-zero length of the -/// distance joint. The definition uses local anchor points -/// so that the initial configuration can violate the constraint -/// slightly. This helps when saving and loading a game. -/// @warning Do not use a zero or short length. -struct b2DistanceJointDef : public b2JointDef -{ - b2DistanceJointDef() - { - type = e_distanceJoint; - localAnchorA.Set(0.0f, 0.0f); - localAnchorB.Set(0.0f, 0.0f); - length = 1.0f; - frequencyHz = 0.0f; - dampingRatio = 0.0f; - } - - /// Initialize the bodies, anchors, and length using the world - /// anchors. - void Initialize(b2Body* bodyA, b2Body* bodyB, - const b2Vec2& anchorA, const b2Vec2& anchorB); - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The natural length between the anchor points. - float32 length; - - /// The mass-spring-damper frequency in Hertz. A value of 0 - /// disables softness. - float32 frequencyHz; - - /// The damping ratio. 0 = no damping, 1 = critical damping. - float32 dampingRatio; -}; - -/// A distance joint constrains two points on two bodies -/// to remain at a fixed distance from each other. You can view -/// this as a massless, rigid rod. -class b2DistanceJoint : public b2Joint -{ -public: - - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - /// Get the reaction force given the inverse time step. - /// Unit is N. - b2Vec2 GetReactionForce(float32 inv_dt) const override; - - /// Get the reaction torque given the inverse time step. - /// Unit is N*m. This is always zero for a distance joint. - float32 GetReactionTorque(float32 inv_dt) const override; - - /// The local anchor point relative to bodyA's origin. - const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; } - - /// The local anchor point relative to bodyB's origin. - const b2Vec2& GetLocalAnchorB() const { return m_localAnchorB; } - - /// Set/get the natural length. - /// Manipulating the length can lead to non-physical behavior when the frequency is zero. - void SetLength(float32 length); - float32 GetLength() const; - - /// Set/get frequency in Hz. - void SetFrequency(float32 hz); - float32 GetFrequency() const; - - /// Set/get damping ratio. - void SetDampingRatio(float32 ratio); - float32 GetDampingRatio() const; - - /// Dump joint to dmLog - void Dump() override; - -protected: - - friend class b2Joint; - b2DistanceJoint(const b2DistanceJointDef* data); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - float32 m_frequencyHz; - float32 m_dampingRatio; - float32 m_bias; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - float32 m_gamma; - float32 m_impulse; - float32 m_length; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_u; - b2Vec2 m_rA; - b2Vec2 m_rB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - float32 m_mass; -}; - -inline void b2DistanceJoint::SetLength(float32 length) -{ - m_length = length; -} - -inline float32 b2DistanceJoint::GetLength() const -{ - return m_length; -} - -inline void b2DistanceJoint::SetFrequency(float32 hz) -{ - m_frequencyHz = hz; -} - -inline float32 b2DistanceJoint::GetFrequency() const -{ - return m_frequencyHz; -} - -inline void b2DistanceJoint::SetDampingRatio(float32 ratio) -{ - m_dampingRatio = ratio; -} - -inline float32 b2DistanceJoint::GetDampingRatio() const -{ - return m_dampingRatio; -} - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2FrictionJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2FrictionJoint.cpp deleted file mode 100644 index cb122eb..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2FrictionJoint.cpp +++ /dev/null @@ -1,251 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2FrictionJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Point-to-point constraint -// Cdot = v2 - v1 -// = v2 + cross(w2, r2) - v1 - cross(w1, r1) -// J = [-I -r1_skew I r2_skew ] -// Identity used: -// w k % (rx i + ry j) = w * (-ry i + rx j) - -// Angle constraint -// Cdot = w2 - w1 -// J = [0 0 -1 0 0 1] -// K = invI1 + invI2 - -void b2FrictionJointDef::Initialize(b2Body* bA, b2Body* bB, const b2Vec2& anchor) -{ - bodyA = bA; - bodyB = bB; - localAnchorA = bodyA->GetLocalPoint(anchor); - localAnchorB = bodyB->GetLocalPoint(anchor); -} - -b2FrictionJoint::b2FrictionJoint(const b2FrictionJointDef* def) -: b2Joint(def) -{ - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - - m_linearImpulse.SetZero(); - m_angularImpulse = 0.0f; - - m_maxForce = def->maxForce; - m_maxTorque = def->maxTorque; -} - -void b2FrictionJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - // Compute the effective mass matrix. - m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - // J = [-I -r1_skew I r2_skew] - // [ 0 -1 0 1] - // r_skew = [-ry; rx] - - // Matlab - // K = [ mA+r1y^2*iA+mB+r2y^2*iB, -r1y*iA*r1x-r2y*iB*r2x, -r1y*iA-r2y*iB] - // [ -r1y*iA*r1x-r2y*iB*r2x, mA+r1x^2*iA+mB+r2x^2*iB, r1x*iA+r2x*iB] - // [ -r1y*iA-r2y*iB, r1x*iA+r2x*iB, iA+iB] - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - b2Mat22 K; - K.ex.x = mA + mB + iA * m_rA.y * m_rA.y + iB * m_rB.y * m_rB.y; - K.ex.y = -iA * m_rA.x * m_rA.y - iB * m_rB.x * m_rB.y; - K.ey.x = K.ex.y; - K.ey.y = mA + mB + iA * m_rA.x * m_rA.x + iB * m_rB.x * m_rB.x; - - m_linearMass = K.GetInverse(); - - m_angularMass = iA + iB; - if (m_angularMass > 0.0f) - { - m_angularMass = 1.0f / m_angularMass; - } - - if (data.step.warmStarting) - { - // Scale impulses to support a variable time step. - m_linearImpulse *= data.step.dtRatio; - m_angularImpulse *= data.step.dtRatio; - - b2Vec2 P(m_linearImpulse.x, m_linearImpulse.y); - vA -= mA * P; - wA -= iA * (b2Cross(m_rA, P) + m_angularImpulse); - vB += mB * P; - wB += iB * (b2Cross(m_rB, P) + m_angularImpulse); - } - else - { - m_linearImpulse.SetZero(); - m_angularImpulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2FrictionJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - float32 h = data.step.dt; - - // Solve angular friction - { - float32 Cdot = wB - wA; - float32 impulse = -m_angularMass * Cdot; - - float32 oldImpulse = m_angularImpulse; - float32 maxImpulse = h * m_maxTorque; - m_angularImpulse = b2Clamp(m_angularImpulse + impulse, -maxImpulse, maxImpulse); - impulse = m_angularImpulse - oldImpulse; - - wA -= iA * impulse; - wB += iB * impulse; - } - - // Solve linear friction - { - b2Vec2 Cdot = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA); - - b2Vec2 impulse = -b2Mul(m_linearMass, Cdot); - b2Vec2 oldImpulse = m_linearImpulse; - m_linearImpulse += impulse; - - float32 maxImpulse = h * m_maxForce; - - if (m_linearImpulse.LengthSquared() > maxImpulse * maxImpulse) - { - m_linearImpulse.Normalize(); - m_linearImpulse *= maxImpulse; - } - - impulse = m_linearImpulse - oldImpulse; - - vA -= mA * impulse; - wA -= iA * b2Cross(m_rA, impulse); - - vB += mB * impulse; - wB += iB * b2Cross(m_rB, impulse); - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2FrictionJoint::SolvePositionConstraints(const b2SolverData& data) -{ - B2_NOT_USED(data); - - return true; -} - -b2Vec2 b2FrictionJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2FrictionJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2FrictionJoint::GetReactionForce(float32 inv_dt) const -{ - return inv_dt * m_linearImpulse; -} - -float32 b2FrictionJoint::GetReactionTorque(float32 inv_dt) const -{ - return inv_dt * m_angularImpulse; -} - -void b2FrictionJoint::SetMaxForce(float32 force) -{ - b2Assert(b2IsValid(force) && force >= 0.0f); - m_maxForce = force; -} - -float32 b2FrictionJoint::GetMaxForce() const -{ - return m_maxForce; -} - -void b2FrictionJoint::SetMaxTorque(float32 torque) -{ - b2Assert(b2IsValid(torque) && torque >= 0.0f); - m_maxTorque = torque; -} - -float32 b2FrictionJoint::GetMaxTorque() const -{ - return m_maxTorque; -} - -void b2FrictionJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2FrictionJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.maxForce = %.15lef;\n", m_maxForce); - b2Log(" jd.maxTorque = %.15lef;\n", m_maxTorque); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2FrictionJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2FrictionJoint.h deleted file mode 100644 index d964f84..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2FrictionJoint.h +++ /dev/null @@ -1,119 +0,0 @@ -/* -* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_FRICTION_JOINT_H -#define B2_FRICTION_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Friction joint definition. -struct b2FrictionJointDef : public b2JointDef -{ - b2FrictionJointDef() - { - type = e_frictionJoint; - localAnchorA.SetZero(); - localAnchorB.SetZero(); - maxForce = 0.0f; - maxTorque = 0.0f; - } - - /// Initialize the bodies, anchors, axis, and reference angle using the world - /// anchor and world axis. - void Initialize(b2Body* bodyA, b2Body* bodyB, const b2Vec2& anchor); - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The maximum friction force in N. - float32 maxForce; - - /// The maximum friction torque in N-m. - float32 maxTorque; -}; - -/// Friction joint. This is used for top-down friction. -/// It provides 2D translational friction and angular friction. -class b2FrictionJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// The local anchor point relative to bodyA's origin. - const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; } - - /// The local anchor point relative to bodyB's origin. - const b2Vec2& GetLocalAnchorB() const { return m_localAnchorB; } - - /// Set the maximum friction force in N. - void SetMaxForce(float32 force); - - /// Get the maximum friction force in N. - float32 GetMaxForce() const; - - /// Set the maximum friction torque in N*m. - void SetMaxTorque(float32 torque); - - /// Get the maximum friction torque in N*m. - float32 GetMaxTorque() const; - - /// Dump joint to dmLog - void Dump() override; - -protected: - - friend class b2Joint; - - b2FrictionJoint(const b2FrictionJointDef* def); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - - // Solver shared - b2Vec2 m_linearImpulse; - float32 m_angularImpulse; - float32 m_maxForce; - float32 m_maxTorque; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_rA; - b2Vec2 m_rB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - b2Mat22 m_linearMass; - float32 m_angularMass; -}; - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2GearJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2GearJoint.cpp deleted file mode 100644 index 1ce575b..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2GearJoint.cpp +++ /dev/null @@ -1,419 +0,0 @@ -/* -* Copyright (c) 2007-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2GearJoint.h" -#include "Box2D/Dynamics/Joints/b2RevoluteJoint.h" -#include "Box2D/Dynamics/Joints/b2PrismaticJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Gear Joint: -// C0 = (coordinate1 + ratio * coordinate2)_initial -// C = (coordinate1 + ratio * coordinate2) - C0 = 0 -// J = [J1 ratio * J2] -// K = J * invM * JT -// = J1 * invM1 * J1T + ratio * ratio * J2 * invM2 * J2T -// -// Revolute: -// coordinate = rotation -// Cdot = angularVelocity -// J = [0 0 1] -// K = J * invM * JT = invI -// -// Prismatic: -// coordinate = dot(p - pg, ug) -// Cdot = dot(v + cross(w, r), ug) -// J = [ug cross(r, ug)] -// K = J * invM * JT = invMass + invI * cross(r, ug)^2 - -b2GearJoint::b2GearJoint(const b2GearJointDef* def) -: b2Joint(def) -{ - m_joint1 = def->joint1; - m_joint2 = def->joint2; - - m_typeA = m_joint1->GetType(); - m_typeB = m_joint2->GetType(); - - b2Assert(m_typeA == e_revoluteJoint || m_typeA == e_prismaticJoint); - b2Assert(m_typeB == e_revoluteJoint || m_typeB == e_prismaticJoint); - - float32 coordinateA, coordinateB; - - // TODO_ERIN there might be some problem with the joint edges in b2Joint. - - m_bodyC = m_joint1->GetBodyA(); - m_bodyA = m_joint1->GetBodyB(); - - // Get geometry of joint1 - b2Transform xfA = m_bodyA->m_xf; - float32 aA = m_bodyA->m_sweep.a; - b2Transform xfC = m_bodyC->m_xf; - float32 aC = m_bodyC->m_sweep.a; - - if (m_typeA == e_revoluteJoint) - { - b2RevoluteJoint* revolute = (b2RevoluteJoint*)def->joint1; - m_localAnchorC = revolute->m_localAnchorA; - m_localAnchorA = revolute->m_localAnchorB; - m_referenceAngleA = revolute->m_referenceAngle; - m_localAxisC.SetZero(); - - coordinateA = aA - aC - m_referenceAngleA; - } - else - { - b2PrismaticJoint* prismatic = (b2PrismaticJoint*)def->joint1; - m_localAnchorC = prismatic->m_localAnchorA; - m_localAnchorA = prismatic->m_localAnchorB; - m_referenceAngleA = prismatic->m_referenceAngle; - m_localAxisC = prismatic->m_localXAxisA; - - b2Vec2 pC = m_localAnchorC; - b2Vec2 pA = b2MulT(xfC.q, b2Mul(xfA.q, m_localAnchorA) + (xfA.p - xfC.p)); - coordinateA = b2Dot(pA - pC, m_localAxisC); - } - - m_bodyD = m_joint2->GetBodyA(); - m_bodyB = m_joint2->GetBodyB(); - - // Get geometry of joint2 - b2Transform xfB = m_bodyB->m_xf; - float32 aB = m_bodyB->m_sweep.a; - b2Transform xfD = m_bodyD->m_xf; - float32 aD = m_bodyD->m_sweep.a; - - if (m_typeB == e_revoluteJoint) - { - b2RevoluteJoint* revolute = (b2RevoluteJoint*)def->joint2; - m_localAnchorD = revolute->m_localAnchorA; - m_localAnchorB = revolute->m_localAnchorB; - m_referenceAngleB = revolute->m_referenceAngle; - m_localAxisD.SetZero(); - - coordinateB = aB - aD - m_referenceAngleB; - } - else - { - b2PrismaticJoint* prismatic = (b2PrismaticJoint*)def->joint2; - m_localAnchorD = prismatic->m_localAnchorA; - m_localAnchorB = prismatic->m_localAnchorB; - m_referenceAngleB = prismatic->m_referenceAngle; - m_localAxisD = prismatic->m_localXAxisA; - - b2Vec2 pD = m_localAnchorD; - b2Vec2 pB = b2MulT(xfD.q, b2Mul(xfB.q, m_localAnchorB) + (xfB.p - xfD.p)); - coordinateB = b2Dot(pB - pD, m_localAxisD); - } - - m_ratio = def->ratio; - - m_constant = coordinateA + m_ratio * coordinateB; - - m_impulse = 0.0f; -} - -void b2GearJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_indexC = m_bodyC->m_islandIndex; - m_indexD = m_bodyD->m_islandIndex; - m_lcA = m_bodyA->m_sweep.localCenter; - m_lcB = m_bodyB->m_sweep.localCenter; - m_lcC = m_bodyC->m_sweep.localCenter; - m_lcD = m_bodyD->m_sweep.localCenter; - m_mA = m_bodyA->m_invMass; - m_mB = m_bodyB->m_invMass; - m_mC = m_bodyC->m_invMass; - m_mD = m_bodyD->m_invMass; - m_iA = m_bodyA->m_invI; - m_iB = m_bodyB->m_invI; - m_iC = m_bodyC->m_invI; - m_iD = m_bodyD->m_invI; - - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - float32 aC = data.positions[m_indexC].a; - b2Vec2 vC = data.velocities[m_indexC].v; - float32 wC = data.velocities[m_indexC].w; - - float32 aD = data.positions[m_indexD].a; - b2Vec2 vD = data.velocities[m_indexD].v; - float32 wD = data.velocities[m_indexD].w; - - b2Rot qA(aA), qB(aB), qC(aC), qD(aD); - - m_mass = 0.0f; - - if (m_typeA == e_revoluteJoint) - { - m_JvAC.SetZero(); - m_JwA = 1.0f; - m_JwC = 1.0f; - m_mass += m_iA + m_iC; - } - else - { - b2Vec2 u = b2Mul(qC, m_localAxisC); - b2Vec2 rC = b2Mul(qC, m_localAnchorC - m_lcC); - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_lcA); - m_JvAC = u; - m_JwC = b2Cross(rC, u); - m_JwA = b2Cross(rA, u); - m_mass += m_mC + m_mA + m_iC * m_JwC * m_JwC + m_iA * m_JwA * m_JwA; - } - - if (m_typeB == e_revoluteJoint) - { - m_JvBD.SetZero(); - m_JwB = m_ratio; - m_JwD = m_ratio; - m_mass += m_ratio * m_ratio * (m_iB + m_iD); - } - else - { - b2Vec2 u = b2Mul(qD, m_localAxisD); - b2Vec2 rD = b2Mul(qD, m_localAnchorD - m_lcD); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_lcB); - m_JvBD = m_ratio * u; - m_JwD = m_ratio * b2Cross(rD, u); - m_JwB = m_ratio * b2Cross(rB, u); - m_mass += m_ratio * m_ratio * (m_mD + m_mB) + m_iD * m_JwD * m_JwD + m_iB * m_JwB * m_JwB; - } - - // Compute effective mass. - m_mass = m_mass > 0.0f ? 1.0f / m_mass : 0.0f; - - if (data.step.warmStarting) - { - vA += (m_mA * m_impulse) * m_JvAC; - wA += m_iA * m_impulse * m_JwA; - vB += (m_mB * m_impulse) * m_JvBD; - wB += m_iB * m_impulse * m_JwB; - vC -= (m_mC * m_impulse) * m_JvAC; - wC -= m_iC * m_impulse * m_JwC; - vD -= (m_mD * m_impulse) * m_JvBD; - wD -= m_iD * m_impulse * m_JwD; - } - else - { - m_impulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; - data.velocities[m_indexC].v = vC; - data.velocities[m_indexC].w = wC; - data.velocities[m_indexD].v = vD; - data.velocities[m_indexD].w = wD; -} - -void b2GearJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - b2Vec2 vC = data.velocities[m_indexC].v; - float32 wC = data.velocities[m_indexC].w; - b2Vec2 vD = data.velocities[m_indexD].v; - float32 wD = data.velocities[m_indexD].w; - - float32 Cdot = b2Dot(m_JvAC, vA - vC) + b2Dot(m_JvBD, vB - vD); - Cdot += (m_JwA * wA - m_JwC * wC) + (m_JwB * wB - m_JwD * wD); - - float32 impulse = -m_mass * Cdot; - m_impulse += impulse; - - vA += (m_mA * impulse) * m_JvAC; - wA += m_iA * impulse * m_JwA; - vB += (m_mB * impulse) * m_JvBD; - wB += m_iB * impulse * m_JwB; - vC -= (m_mC * impulse) * m_JvAC; - wC -= m_iC * impulse * m_JwC; - vD -= (m_mD * impulse) * m_JvBD; - wD -= m_iD * impulse * m_JwD; - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; - data.velocities[m_indexC].v = vC; - data.velocities[m_indexC].w = wC; - data.velocities[m_indexD].v = vD; - data.velocities[m_indexD].w = wD; -} - -bool b2GearJoint::SolvePositionConstraints(const b2SolverData& data) -{ - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 cC = data.positions[m_indexC].c; - float32 aC = data.positions[m_indexC].a; - b2Vec2 cD = data.positions[m_indexD].c; - float32 aD = data.positions[m_indexD].a; - - b2Rot qA(aA), qB(aB), qC(aC), qD(aD); - - float32 linearError = 0.0f; - - float32 coordinateA, coordinateB; - - b2Vec2 JvAC, JvBD; - float32 JwA, JwB, JwC, JwD; - float32 mass = 0.0f; - - if (m_typeA == e_revoluteJoint) - { - JvAC.SetZero(); - JwA = 1.0f; - JwC = 1.0f; - mass += m_iA + m_iC; - - coordinateA = aA - aC - m_referenceAngleA; - } - else - { - b2Vec2 u = b2Mul(qC, m_localAxisC); - b2Vec2 rC = b2Mul(qC, m_localAnchorC - m_lcC); - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_lcA); - JvAC = u; - JwC = b2Cross(rC, u); - JwA = b2Cross(rA, u); - mass += m_mC + m_mA + m_iC * JwC * JwC + m_iA * JwA * JwA; - - b2Vec2 pC = m_localAnchorC - m_lcC; - b2Vec2 pA = b2MulT(qC, rA + (cA - cC)); - coordinateA = b2Dot(pA - pC, m_localAxisC); - } - - if (m_typeB == e_revoluteJoint) - { - JvBD.SetZero(); - JwB = m_ratio; - JwD = m_ratio; - mass += m_ratio * m_ratio * (m_iB + m_iD); - - coordinateB = aB - aD - m_referenceAngleB; - } - else - { - b2Vec2 u = b2Mul(qD, m_localAxisD); - b2Vec2 rD = b2Mul(qD, m_localAnchorD - m_lcD); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_lcB); - JvBD = m_ratio * u; - JwD = m_ratio * b2Cross(rD, u); - JwB = m_ratio * b2Cross(rB, u); - mass += m_ratio * m_ratio * (m_mD + m_mB) + m_iD * JwD * JwD + m_iB * JwB * JwB; - - b2Vec2 pD = m_localAnchorD - m_lcD; - b2Vec2 pB = b2MulT(qD, rB + (cB - cD)); - coordinateB = b2Dot(pB - pD, m_localAxisD); - } - - float32 C = (coordinateA + m_ratio * coordinateB) - m_constant; - - float32 impulse = 0.0f; - if (mass > 0.0f) - { - impulse = -C / mass; - } - - cA += m_mA * impulse * JvAC; - aA += m_iA * impulse * JwA; - cB += m_mB * impulse * JvBD; - aB += m_iB * impulse * JwB; - cC -= m_mC * impulse * JvAC; - aC -= m_iC * impulse * JwC; - cD -= m_mD * impulse * JvBD; - aD -= m_iD * impulse * JwD; - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - data.positions[m_indexC].c = cC; - data.positions[m_indexC].a = aC; - data.positions[m_indexD].c = cD; - data.positions[m_indexD].a = aD; - - // TODO_ERIN not implemented - return linearError < b2_linearSlop; -} - -b2Vec2 b2GearJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2GearJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2GearJoint::GetReactionForce(float32 inv_dt) const -{ - b2Vec2 P = m_impulse * m_JvAC; - return inv_dt * P; -} - -float32 b2GearJoint::GetReactionTorque(float32 inv_dt) const -{ - float32 L = m_impulse * m_JwA; - return inv_dt * L; -} - -void b2GearJoint::SetRatio(float32 ratio) -{ - b2Assert(b2IsValid(ratio)); - m_ratio = ratio; -} - -float32 b2GearJoint::GetRatio() const -{ - return m_ratio; -} - -void b2GearJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - int32 index1 = m_joint1->m_index; - int32 index2 = m_joint2->m_index; - - b2Log(" b2GearJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.joint1 = joints[%d];\n", index1); - b2Log(" jd.joint2 = joints[%d];\n", index2); - b2Log(" jd.ratio = %.15lef;\n", m_ratio); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2GearJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2GearJoint.h deleted file mode 100644 index 53f7e58..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2GearJoint.h +++ /dev/null @@ -1,125 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_GEAR_JOINT_H -#define B2_GEAR_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Gear joint definition. This definition requires two existing -/// revolute or prismatic joints (any combination will work). -struct b2GearJointDef : public b2JointDef -{ - b2GearJointDef() - { - type = e_gearJoint; - joint1 = nullptr; - joint2 = nullptr; - ratio = 1.0f; - } - - /// The first revolute/prismatic joint attached to the gear joint. - b2Joint* joint1; - - /// The second revolute/prismatic joint attached to the gear joint. - b2Joint* joint2; - - /// The gear ratio. - /// @see b2GearJoint for explanation. - float32 ratio; -}; - -/// A gear joint is used to connect two joints together. Either joint -/// can be a revolute or prismatic joint. You specify a gear ratio -/// to bind the motions together: -/// coordinate1 + ratio * coordinate2 = constant -/// The ratio can be negative or positive. If one joint is a revolute joint -/// and the other joint is a prismatic joint, then the ratio will have units -/// of length or units of 1/length. -/// @warning You have to manually destroy the gear joint if joint1 or joint2 -/// is destroyed. -class b2GearJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// Get the first joint. - b2Joint* GetJoint1() { return m_joint1; } - - /// Get the second joint. - b2Joint* GetJoint2() { return m_joint2; } - - /// Set/Get the gear ratio. - void SetRatio(float32 ratio); - float32 GetRatio() const; - - /// Dump joint to dmLog - void Dump() override; - -protected: - - friend class b2Joint; - b2GearJoint(const b2GearJointDef* data); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - b2Joint* m_joint1; - b2Joint* m_joint2; - - b2JointType m_typeA; - b2JointType m_typeB; - - // Body A is connected to body C - // Body B is connected to body D - b2Body* m_bodyC; - b2Body* m_bodyD; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - b2Vec2 m_localAnchorC; - b2Vec2 m_localAnchorD; - - b2Vec2 m_localAxisC; - b2Vec2 m_localAxisD; - - float32 m_referenceAngleA; - float32 m_referenceAngleB; - - float32 m_constant; - float32 m_ratio; - - float32 m_impulse; - - // Solver temp - int32 m_indexA, m_indexB, m_indexC, m_indexD; - b2Vec2 m_lcA, m_lcB, m_lcC, m_lcD; - float32 m_mA, m_mB, m_mC, m_mD; - float32 m_iA, m_iB, m_iC, m_iD; - b2Vec2 m_JvAC, m_JvBD; - float32 m_JwA, m_JwB, m_JwC, m_JwD; - float32 m_mass; -}; - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2Joint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2Joint.cpp deleted file mode 100644 index 8103b01..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2Joint.cpp +++ /dev/null @@ -1,211 +0,0 @@ -/* -* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2Joint.h" -#include "Box2D/Dynamics/Joints/b2DistanceJoint.h" -#include "Box2D/Dynamics/Joints/b2WheelJoint.h" -#include "Box2D/Dynamics/Joints/b2MouseJoint.h" -#include "Box2D/Dynamics/Joints/b2RevoluteJoint.h" -#include "Box2D/Dynamics/Joints/b2PrismaticJoint.h" -#include "Box2D/Dynamics/Joints/b2PulleyJoint.h" -#include "Box2D/Dynamics/Joints/b2GearJoint.h" -#include "Box2D/Dynamics/Joints/b2WeldJoint.h" -#include "Box2D/Dynamics/Joints/b2FrictionJoint.h" -#include "Box2D/Dynamics/Joints/b2RopeJoint.h" -#include "Box2D/Dynamics/Joints/b2MotorJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2World.h" -#include "Box2D/Common/b2BlockAllocator.h" - -#include <new> - -b2Joint* b2Joint::Create(const b2JointDef* def, b2BlockAllocator* allocator) -{ - b2Joint* joint = nullptr; - - switch (def->type) - { - case e_distanceJoint: - { - void* mem = allocator->Allocate(sizeof(b2DistanceJoint)); - joint = new (mem) b2DistanceJoint(static_cast<const b2DistanceJointDef*>(def)); - } - break; - - case e_mouseJoint: - { - void* mem = allocator->Allocate(sizeof(b2MouseJoint)); - joint = new (mem) b2MouseJoint(static_cast<const b2MouseJointDef*>(def)); - } - break; - - case e_prismaticJoint: - { - void* mem = allocator->Allocate(sizeof(b2PrismaticJoint)); - joint = new (mem) b2PrismaticJoint(static_cast<const b2PrismaticJointDef*>(def)); - } - break; - - case e_revoluteJoint: - { - void* mem = allocator->Allocate(sizeof(b2RevoluteJoint)); - joint = new (mem) b2RevoluteJoint(static_cast<const b2RevoluteJointDef*>(def)); - } - break; - - case e_pulleyJoint: - { - void* mem = allocator->Allocate(sizeof(b2PulleyJoint)); - joint = new (mem) b2PulleyJoint(static_cast<const b2PulleyJointDef*>(def)); - } - break; - - case e_gearJoint: - { - void* mem = allocator->Allocate(sizeof(b2GearJoint)); - joint = new (mem) b2GearJoint(static_cast<const b2GearJointDef*>(def)); - } - break; - - case e_wheelJoint: - { - void* mem = allocator->Allocate(sizeof(b2WheelJoint)); - joint = new (mem) b2WheelJoint(static_cast<const b2WheelJointDef*>(def)); - } - break; - - case e_weldJoint: - { - void* mem = allocator->Allocate(sizeof(b2WeldJoint)); - joint = new (mem) b2WeldJoint(static_cast<const b2WeldJointDef*>(def)); - } - break; - - case e_frictionJoint: - { - void* mem = allocator->Allocate(sizeof(b2FrictionJoint)); - joint = new (mem) b2FrictionJoint(static_cast<const b2FrictionJointDef*>(def)); - } - break; - - case e_ropeJoint: - { - void* mem = allocator->Allocate(sizeof(b2RopeJoint)); - joint = new (mem) b2RopeJoint(static_cast<const b2RopeJointDef*>(def)); - } - break; - - case e_motorJoint: - { - void* mem = allocator->Allocate(sizeof(b2MotorJoint)); - joint = new (mem) b2MotorJoint(static_cast<const b2MotorJointDef*>(def)); - } - break; - - default: - b2Assert(false); - break; - } - - return joint; -} - -void b2Joint::Destroy(b2Joint* joint, b2BlockAllocator* allocator) -{ - joint->~b2Joint(); - switch (joint->m_type) - { - case e_distanceJoint: - allocator->Free(joint, sizeof(b2DistanceJoint)); - break; - - case e_mouseJoint: - allocator->Free(joint, sizeof(b2MouseJoint)); - break; - - case e_prismaticJoint: - allocator->Free(joint, sizeof(b2PrismaticJoint)); - break; - - case e_revoluteJoint: - allocator->Free(joint, sizeof(b2RevoluteJoint)); - break; - - case e_pulleyJoint: - allocator->Free(joint, sizeof(b2PulleyJoint)); - break; - - case e_gearJoint: - allocator->Free(joint, sizeof(b2GearJoint)); - break; - - case e_wheelJoint: - allocator->Free(joint, sizeof(b2WheelJoint)); - break; - - case e_weldJoint: - allocator->Free(joint, sizeof(b2WeldJoint)); - break; - - case e_frictionJoint: - allocator->Free(joint, sizeof(b2FrictionJoint)); - break; - - case e_ropeJoint: - allocator->Free(joint, sizeof(b2RopeJoint)); - break; - - case e_motorJoint: - allocator->Free(joint, sizeof(b2MotorJoint)); - break; - - default: - b2Assert(false); - break; - } -} - -b2Joint::b2Joint(const b2JointDef* def) -{ - b2Assert(def->bodyA != def->bodyB); - - m_type = def->type; - m_prev = nullptr; - m_next = nullptr; - m_bodyA = def->bodyA; - m_bodyB = def->bodyB; - m_index = 0; - m_collideConnected = def->collideConnected; - m_islandFlag = false; - m_userData = def->userData; - - m_edgeA.joint = nullptr; - m_edgeA.other = nullptr; - m_edgeA.prev = nullptr; - m_edgeA.next = nullptr; - - m_edgeB.joint = nullptr; - m_edgeB.other = nullptr; - m_edgeB.prev = nullptr; - m_edgeB.next = nullptr; -} - -bool b2Joint::IsActive() const -{ - return m_bodyA->IsActive() && m_bodyB->IsActive(); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2Joint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2Joint.h deleted file mode 100644 index 2ab5616..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2Joint.h +++ /dev/null @@ -1,226 +0,0 @@ -/* -* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_JOINT_H -#define B2_JOINT_H - -#include "Box2D/Common/b2Math.h" - -class b2Body; -class b2Joint; -struct b2SolverData; -class b2BlockAllocator; - -enum b2JointType -{ - e_unknownJoint, - e_revoluteJoint, - e_prismaticJoint, - e_distanceJoint, - e_pulleyJoint, - e_mouseJoint, - e_gearJoint, - e_wheelJoint, - e_weldJoint, - e_frictionJoint, - e_ropeJoint, - e_motorJoint -}; - -enum b2LimitState -{ - e_inactiveLimit, - e_atLowerLimit, - e_atUpperLimit, - e_equalLimits -}; - -struct b2Jacobian -{ - b2Vec2 linear; - float32 angularA; - float32 angularB; -}; - -/// A joint edge is used to connect bodies and joints together -/// in a joint graph where each body is a node and each joint -/// is an edge. A joint edge belongs to a doubly linked list -/// maintained in each attached body. Each joint has two joint -/// nodes, one for each attached body. -struct b2JointEdge -{ - b2Body* other; ///< provides quick access to the other body attached. - b2Joint* joint; ///< the joint - b2JointEdge* prev; ///< the previous joint edge in the body's joint list - b2JointEdge* next; ///< the next joint edge in the body's joint list -}; - -/// Joint definitions are used to construct joints. -struct b2JointDef -{ - b2JointDef() - { - type = e_unknownJoint; - userData = nullptr; - bodyA = nullptr; - bodyB = nullptr; - collideConnected = false; - } - - /// The joint type is set automatically for concrete joint types. - b2JointType type; - - /// Use this to attach application specific data to your joints. - void* userData; - - /// The first attached body. - b2Body* bodyA; - - /// The second attached body. - b2Body* bodyB; - - /// Set this flag to true if the attached bodies should collide. - bool collideConnected; -}; - -/// The base joint class. Joints are used to constraint two bodies together in -/// various fashions. Some joints also feature limits and motors. -class b2Joint -{ -public: - - /// Get the type of the concrete joint. - b2JointType GetType() const; - - /// Get the first body attached to this joint. - b2Body* GetBodyA(); - - /// Get the second body attached to this joint. - b2Body* GetBodyB(); - - /// Get the anchor point on bodyA in world coordinates. - virtual b2Vec2 GetAnchorA() const = 0; - - /// Get the anchor point on bodyB in world coordinates. - virtual b2Vec2 GetAnchorB() const = 0; - - /// Get the reaction force on bodyB at the joint anchor in Newtons. - virtual b2Vec2 GetReactionForce(float32 inv_dt) const = 0; - - /// Get the reaction torque on bodyB in N*m. - virtual float32 GetReactionTorque(float32 inv_dt) const = 0; - - /// Get the next joint the world joint list. - b2Joint* GetNext(); - const b2Joint* GetNext() const; - - /// Get the user data pointer. - void* GetUserData() const; - - /// Set the user data pointer. - void SetUserData(void* data); - - /// Short-cut function to determine if either body is inactive. - bool IsActive() const; - - /// Get collide connected. - /// Note: modifying the collide connect flag won't work correctly because - /// the flag is only checked when fixture AABBs begin to overlap. - bool GetCollideConnected() const; - - /// Dump this joint to the log file. - virtual void Dump() { b2Log("// Dump is not supported for this joint type.\n"); } - - /// Shift the origin for any points stored in world coordinates. - virtual void ShiftOrigin(const b2Vec2& newOrigin) { B2_NOT_USED(newOrigin); } - -protected: - friend class b2World; - friend class b2Body; - friend class b2Island; - friend class b2GearJoint; - - static b2Joint* Create(const b2JointDef* def, b2BlockAllocator* allocator); - static void Destroy(b2Joint* joint, b2BlockAllocator* allocator); - - b2Joint(const b2JointDef* def); - virtual ~b2Joint() {} - - virtual void InitVelocityConstraints(const b2SolverData& data) = 0; - virtual void SolveVelocityConstraints(const b2SolverData& data) = 0; - - // This returns true if the position errors are within tolerance. - virtual bool SolvePositionConstraints(const b2SolverData& data) = 0; - - b2JointType m_type; - b2Joint* m_prev; - b2Joint* m_next; - b2JointEdge m_edgeA; - b2JointEdge m_edgeB; - b2Body* m_bodyA; - b2Body* m_bodyB; - - int32 m_index; - - bool m_islandFlag; - bool m_collideConnected; - - void* m_userData; -}; - -inline b2JointType b2Joint::GetType() const -{ - return m_type; -} - -inline b2Body* b2Joint::GetBodyA() -{ - return m_bodyA; -} - -inline b2Body* b2Joint::GetBodyB() -{ - return m_bodyB; -} - -inline b2Joint* b2Joint::GetNext() -{ - return m_next; -} - -inline const b2Joint* b2Joint::GetNext() const -{ - return m_next; -} - -inline void* b2Joint::GetUserData() const -{ - return m_userData; -} - -inline void b2Joint::SetUserData(void* data) -{ - m_userData = data; -} - -inline bool b2Joint::GetCollideConnected() const -{ - return m_collideConnected; -} - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2MotorJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2MotorJoint.cpp deleted file mode 100644 index 7906845..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2MotorJoint.cpp +++ /dev/null @@ -1,309 +0,0 @@ -/* -* Copyright (c) 2006-2012 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2MotorJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Point-to-point constraint -// Cdot = v2 - v1 -// = v2 + cross(w2, r2) - v1 - cross(w1, r1) -// J = [-I -r1_skew I r2_skew ] -// Identity used: -// w k % (rx i + ry j) = w * (-ry i + rx j) -// -// r1 = offset - c1 -// r2 = -c2 - -// Angle constraint -// Cdot = w2 - w1 -// J = [0 0 -1 0 0 1] -// K = invI1 + invI2 - -void b2MotorJointDef::Initialize(b2Body* bA, b2Body* bB) -{ - bodyA = bA; - bodyB = bB; - b2Vec2 xB = bodyB->GetPosition(); - linearOffset = bodyA->GetLocalPoint(xB); - - float32 angleA = bodyA->GetAngle(); - float32 angleB = bodyB->GetAngle(); - angularOffset = angleB - angleA; -} - -b2MotorJoint::b2MotorJoint(const b2MotorJointDef* def) -: b2Joint(def) -{ - m_linearOffset = def->linearOffset; - m_angularOffset = def->angularOffset; - - m_linearImpulse.SetZero(); - m_angularImpulse = 0.0f; - - m_maxForce = def->maxForce; - m_maxTorque = def->maxTorque; - m_correctionFactor = def->correctionFactor; -} - -void b2MotorJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - // Compute the effective mass matrix. - m_rA = b2Mul(qA, m_linearOffset - m_localCenterA); - m_rB = b2Mul(qB, -m_localCenterB); - - // J = [-I -r1_skew I r2_skew] - // r_skew = [-ry; rx] - - // Matlab - // K = [ mA+r1y^2*iA+mB+r2y^2*iB, -r1y*iA*r1x-r2y*iB*r2x, -r1y*iA-r2y*iB] - // [ -r1y*iA*r1x-r2y*iB*r2x, mA+r1x^2*iA+mB+r2x^2*iB, r1x*iA+r2x*iB] - // [ -r1y*iA-r2y*iB, r1x*iA+r2x*iB, iA+iB] - - - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - // Upper 2 by 2 of K for point to point - b2Mat22 K; - K.ex.x = mA + mB + iA * m_rA.y * m_rA.y + iB * m_rB.y * m_rB.y; - K.ex.y = -iA * m_rA.x * m_rA.y - iB * m_rB.x * m_rB.y; - K.ey.x = K.ex.y; - K.ey.y = mA + mB + iA * m_rA.x * m_rA.x + iB * m_rB.x * m_rB.x; - - m_linearMass = K.GetInverse(); - - m_angularMass = iA + iB; - if (m_angularMass > 0.0f) - { - m_angularMass = 1.0f / m_angularMass; - } - - m_linearError = cB + m_rB - cA - m_rA; - m_angularError = aB - aA - m_angularOffset; - - if (data.step.warmStarting) - { - // Scale impulses to support a variable time step. - m_linearImpulse *= data.step.dtRatio; - m_angularImpulse *= data.step.dtRatio; - - b2Vec2 P(m_linearImpulse.x, m_linearImpulse.y); - vA -= mA * P; - wA -= iA * (b2Cross(m_rA, P) + m_angularImpulse); - vB += mB * P; - wB += iB * (b2Cross(m_rB, P) + m_angularImpulse); - } - else - { - m_linearImpulse.SetZero(); - m_angularImpulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2MotorJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - float32 h = data.step.dt; - float32 inv_h = data.step.inv_dt; - - // Solve angular friction - { - float32 Cdot = wB - wA + inv_h * m_correctionFactor * m_angularError; - float32 impulse = -m_angularMass * Cdot; - - float32 oldImpulse = m_angularImpulse; - float32 maxImpulse = h * m_maxTorque; - m_angularImpulse = b2Clamp(m_angularImpulse + impulse, -maxImpulse, maxImpulse); - impulse = m_angularImpulse - oldImpulse; - - wA -= iA * impulse; - wB += iB * impulse; - } - - // Solve linear friction - { - b2Vec2 Cdot = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA) + inv_h * m_correctionFactor * m_linearError; - - b2Vec2 impulse = -b2Mul(m_linearMass, Cdot); - b2Vec2 oldImpulse = m_linearImpulse; - m_linearImpulse += impulse; - - float32 maxImpulse = h * m_maxForce; - - if (m_linearImpulse.LengthSquared() > maxImpulse * maxImpulse) - { - m_linearImpulse.Normalize(); - m_linearImpulse *= maxImpulse; - } - - impulse = m_linearImpulse - oldImpulse; - - vA -= mA * impulse; - wA -= iA * b2Cross(m_rA, impulse); - - vB += mB * impulse; - wB += iB * b2Cross(m_rB, impulse); - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2MotorJoint::SolvePositionConstraints(const b2SolverData& data) -{ - B2_NOT_USED(data); - - return true; -} - -b2Vec2 b2MotorJoint::GetAnchorA() const -{ - return m_bodyA->GetPosition(); -} - -b2Vec2 b2MotorJoint::GetAnchorB() const -{ - return m_bodyB->GetPosition(); -} - -b2Vec2 b2MotorJoint::GetReactionForce(float32 inv_dt) const -{ - return inv_dt * m_linearImpulse; -} - -float32 b2MotorJoint::GetReactionTorque(float32 inv_dt) const -{ - return inv_dt * m_angularImpulse; -} - -void b2MotorJoint::SetMaxForce(float32 force) -{ - b2Assert(b2IsValid(force) && force >= 0.0f); - m_maxForce = force; -} - -float32 b2MotorJoint::GetMaxForce() const -{ - return m_maxForce; -} - -void b2MotorJoint::SetMaxTorque(float32 torque) -{ - b2Assert(b2IsValid(torque) && torque >= 0.0f); - m_maxTorque = torque; -} - -float32 b2MotorJoint::GetMaxTorque() const -{ - return m_maxTorque; -} - -void b2MotorJoint::SetCorrectionFactor(float32 factor) -{ - b2Assert(b2IsValid(factor) && 0.0f <= factor && factor <= 1.0f); - m_correctionFactor = factor; -} - -float32 b2MotorJoint::GetCorrectionFactor() const -{ - return m_correctionFactor; -} - -void b2MotorJoint::SetLinearOffset(const b2Vec2& linearOffset) -{ - if (linearOffset.x != m_linearOffset.x || linearOffset.y != m_linearOffset.y) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_linearOffset = linearOffset; - } -} - -const b2Vec2& b2MotorJoint::GetLinearOffset() const -{ - return m_linearOffset; -} - -void b2MotorJoint::SetAngularOffset(float32 angularOffset) -{ - if (angularOffset != m_angularOffset) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_angularOffset = angularOffset; - } -} - -float32 b2MotorJoint::GetAngularOffset() const -{ - return m_angularOffset; -} - -void b2MotorJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2MotorJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.linearOffset.Set(%.15lef, %.15lef);\n", m_linearOffset.x, m_linearOffset.y); - b2Log(" jd.angularOffset = %.15lef;\n", m_angularOffset); - b2Log(" jd.maxForce = %.15lef;\n", m_maxForce); - b2Log(" jd.maxTorque = %.15lef;\n", m_maxTorque); - b2Log(" jd.correctionFactor = %.15lef;\n", m_correctionFactor); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2MotorJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2MotorJoint.h deleted file mode 100644 index f384f41..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2MotorJoint.h +++ /dev/null @@ -1,133 +0,0 @@ -/* -* Copyright (c) 2006-2012 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_MOTOR_JOINT_H -#define B2_MOTOR_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Motor joint definition. -struct b2MotorJointDef : public b2JointDef -{ - b2MotorJointDef() - { - type = e_motorJoint; - linearOffset.SetZero(); - angularOffset = 0.0f; - maxForce = 1.0f; - maxTorque = 1.0f; - correctionFactor = 0.3f; - } - - /// Initialize the bodies and offsets using the current transforms. - void Initialize(b2Body* bodyA, b2Body* bodyB); - - /// Position of bodyB minus the position of bodyA, in bodyA's frame, in meters. - b2Vec2 linearOffset; - - /// The bodyB angle minus bodyA angle in radians. - float32 angularOffset; - - /// The maximum motor force in N. - float32 maxForce; - - /// The maximum motor torque in N-m. - float32 maxTorque; - - /// Position correction factor in the range [0,1]. - float32 correctionFactor; -}; - -/// A motor joint is used to control the relative motion -/// between two bodies. A typical usage is to control the movement -/// of a dynamic body with respect to the ground. -class b2MotorJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// Set/get the target linear offset, in frame A, in meters. - void SetLinearOffset(const b2Vec2& linearOffset); - const b2Vec2& GetLinearOffset() const; - - /// Set/get the target angular offset, in radians. - void SetAngularOffset(float32 angularOffset); - float32 GetAngularOffset() const; - - /// Set the maximum friction force in N. - void SetMaxForce(float32 force); - - /// Get the maximum friction force in N. - float32 GetMaxForce() const; - - /// Set the maximum friction torque in N*m. - void SetMaxTorque(float32 torque); - - /// Get the maximum friction torque in N*m. - float32 GetMaxTorque() const; - - /// Set the position correction factor in the range [0,1]. - void SetCorrectionFactor(float32 factor); - - /// Get the position correction factor in the range [0,1]. - float32 GetCorrectionFactor() const; - - /// Dump to b2Log - void Dump() override; - -protected: - - friend class b2Joint; - - b2MotorJoint(const b2MotorJointDef* def); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - // Solver shared - b2Vec2 m_linearOffset; - float32 m_angularOffset; - b2Vec2 m_linearImpulse; - float32 m_angularImpulse; - float32 m_maxForce; - float32 m_maxTorque; - float32 m_correctionFactor; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_rA; - b2Vec2 m_rB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - b2Vec2 m_linearError; - float32 m_angularError; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - b2Mat22 m_linearMass; - float32 m_angularMass; -}; - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2MouseJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2MouseJoint.cpp deleted file mode 100644 index 637e4cd..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2MouseJoint.cpp +++ /dev/null @@ -1,222 +0,0 @@ -/* -* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2MouseJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// p = attached point, m = mouse point -// C = p - m -// Cdot = v -// = v + cross(w, r) -// J = [I r_skew] -// Identity used: -// w k % (rx i + ry j) = w * (-ry i + rx j) - -b2MouseJoint::b2MouseJoint(const b2MouseJointDef* def) -: b2Joint(def) -{ - b2Assert(def->target.IsValid()); - b2Assert(b2IsValid(def->maxForce) && def->maxForce >= 0.0f); - b2Assert(b2IsValid(def->frequencyHz) && def->frequencyHz >= 0.0f); - b2Assert(b2IsValid(def->dampingRatio) && def->dampingRatio >= 0.0f); - - m_targetA = def->target; - m_localAnchorB = b2MulT(m_bodyB->GetTransform(), m_targetA); - - m_maxForce = def->maxForce; - m_impulse.SetZero(); - - m_frequencyHz = def->frequencyHz; - m_dampingRatio = def->dampingRatio; - - m_beta = 0.0f; - m_gamma = 0.0f; -} - -void b2MouseJoint::SetTarget(const b2Vec2& target) -{ - if (target != m_targetA) - { - m_bodyB->SetAwake(true); - m_targetA = target; - } -} - -const b2Vec2& b2MouseJoint::GetTarget() const -{ - return m_targetA; -} - -void b2MouseJoint::SetMaxForce(float32 force) -{ - m_maxForce = force; -} - -float32 b2MouseJoint::GetMaxForce() const -{ - return m_maxForce; -} - -void b2MouseJoint::SetFrequency(float32 hz) -{ - m_frequencyHz = hz; -} - -float32 b2MouseJoint::GetFrequency() const -{ - return m_frequencyHz; -} - -void b2MouseJoint::SetDampingRatio(float32 ratio) -{ - m_dampingRatio = ratio; -} - -float32 b2MouseJoint::GetDampingRatio() const -{ - return m_dampingRatio; -} - -void b2MouseJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexB = m_bodyB->m_islandIndex; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassB = m_bodyB->m_invMass; - m_invIB = m_bodyB->m_invI; - - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qB(aB); - - float32 mass = m_bodyB->GetMass(); - - // Frequency - float32 omega = 2.0f * b2_pi * m_frequencyHz; - - // Damping coefficient - float32 d = 2.0f * mass * m_dampingRatio * omega; - - // Spring stiffness - float32 k = mass * (omega * omega); - - // magic formulas - // gamma has units of inverse mass. - // beta has units of inverse time. - float32 h = data.step.dt; - b2Assert(d + h * k > b2_epsilon); - m_gamma = h * (d + h * k); - if (m_gamma != 0.0f) - { - m_gamma = 1.0f / m_gamma; - } - m_beta = h * k * m_gamma; - - // Compute the effective mass matrix. - m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - // K = [(1/m1 + 1/m2) * eye(2) - skew(r1) * invI1 * skew(r1) - skew(r2) * invI2 * skew(r2)] - // = [1/m1+1/m2 0 ] + invI1 * [r1.y*r1.y -r1.x*r1.y] + invI2 * [r1.y*r1.y -r1.x*r1.y] - // [ 0 1/m1+1/m2] [-r1.x*r1.y r1.x*r1.x] [-r1.x*r1.y r1.x*r1.x] - b2Mat22 K; - K.ex.x = m_invMassB + m_invIB * m_rB.y * m_rB.y + m_gamma; - K.ex.y = -m_invIB * m_rB.x * m_rB.y; - K.ey.x = K.ex.y; - K.ey.y = m_invMassB + m_invIB * m_rB.x * m_rB.x + m_gamma; - - m_mass = K.GetInverse(); - - m_C = cB + m_rB - m_targetA; - m_C *= m_beta; - - // Cheat with some damping - wB *= 0.98f; - - if (data.step.warmStarting) - { - m_impulse *= data.step.dtRatio; - vB += m_invMassB * m_impulse; - wB += m_invIB * b2Cross(m_rB, m_impulse); - } - else - { - m_impulse.SetZero(); - } - - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2MouseJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - // Cdot = v + cross(w, r) - b2Vec2 Cdot = vB + b2Cross(wB, m_rB); - b2Vec2 impulse = b2Mul(m_mass, -(Cdot + m_C + m_gamma * m_impulse)); - - b2Vec2 oldImpulse = m_impulse; - m_impulse += impulse; - float32 maxImpulse = data.step.dt * m_maxForce; - if (m_impulse.LengthSquared() > maxImpulse * maxImpulse) - { - m_impulse *= maxImpulse / m_impulse.Length(); - } - impulse = m_impulse - oldImpulse; - - vB += m_invMassB * impulse; - wB += m_invIB * b2Cross(m_rB, impulse); - - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2MouseJoint::SolvePositionConstraints(const b2SolverData& data) -{ - B2_NOT_USED(data); - return true; -} - -b2Vec2 b2MouseJoint::GetAnchorA() const -{ - return m_targetA; -} - -b2Vec2 b2MouseJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2MouseJoint::GetReactionForce(float32 inv_dt) const -{ - return inv_dt * m_impulse; -} - -float32 b2MouseJoint::GetReactionTorque(float32 inv_dt) const -{ - return inv_dt * 0.0f; -} - -void b2MouseJoint::ShiftOrigin(const b2Vec2& newOrigin) -{ - m_targetA -= newOrigin; -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2MouseJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2MouseJoint.h deleted file mode 100644 index 7441978..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2MouseJoint.h +++ /dev/null @@ -1,129 +0,0 @@ -/* -* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_MOUSE_JOINT_H -#define B2_MOUSE_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Mouse joint definition. This requires a world target point, -/// tuning parameters, and the time step. -struct b2MouseJointDef : public b2JointDef -{ - b2MouseJointDef() - { - type = e_mouseJoint; - target.Set(0.0f, 0.0f); - maxForce = 0.0f; - frequencyHz = 5.0f; - dampingRatio = 0.7f; - } - - /// The initial world target point. This is assumed - /// to coincide with the body anchor initially. - b2Vec2 target; - - /// The maximum constraint force that can be exerted - /// to move the candidate body. Usually you will express - /// as some multiple of the weight (multiplier * mass * gravity). - float32 maxForce; - - /// The response speed. - float32 frequencyHz; - - /// The damping ratio. 0 = no damping, 1 = critical damping. - float32 dampingRatio; -}; - -/// A mouse joint is used to make a point on a body track a -/// specified world point. This a soft constraint with a maximum -/// force. This allows the constraint to stretch and without -/// applying huge forces. -/// NOTE: this joint is not documented in the manual because it was -/// developed to be used in the testbed. If you want to learn how to -/// use the mouse joint, look at the testbed. -class b2MouseJoint : public b2Joint -{ -public: - - /// Implements b2Joint. - b2Vec2 GetAnchorA() const override; - - /// Implements b2Joint. - b2Vec2 GetAnchorB() const override; - - /// Implements b2Joint. - b2Vec2 GetReactionForce(float32 inv_dt) const override; - - /// Implements b2Joint. - float32 GetReactionTorque(float32 inv_dt) const override; - - /// Use this to update the target point. - void SetTarget(const b2Vec2& target); - const b2Vec2& GetTarget() const; - - /// Set/get the maximum force in Newtons. - void SetMaxForce(float32 force); - float32 GetMaxForce() const; - - /// Set/get the frequency in Hertz. - void SetFrequency(float32 hz); - float32 GetFrequency() const; - - /// Set/get the damping ratio (dimensionless). - void SetDampingRatio(float32 ratio); - float32 GetDampingRatio() const; - - /// The mouse joint does not support dumping. - void Dump() override { b2Log("Mouse joint dumping is not supported.\n"); } - - /// Implement b2Joint::ShiftOrigin - void ShiftOrigin(const b2Vec2& newOrigin) override; - -protected: - friend class b2Joint; - - b2MouseJoint(const b2MouseJointDef* def); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - b2Vec2 m_localAnchorB; - b2Vec2 m_targetA; - float32 m_frequencyHz; - float32 m_dampingRatio; - float32 m_beta; - - // Solver shared - b2Vec2 m_impulse; - float32 m_maxForce; - float32 m_gamma; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_rB; - b2Vec2 m_localCenterB; - float32 m_invMassB; - float32 m_invIB; - b2Mat22 m_mass; - b2Vec2 m_C; -}; - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2PrismaticJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2PrismaticJoint.cpp deleted file mode 100644 index 5da19b6..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2PrismaticJoint.cpp +++ /dev/null @@ -1,642 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2PrismaticJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Linear constraint (point-to-line) -// d = p2 - p1 = x2 + r2 - x1 - r1 -// C = dot(perp, d) -// Cdot = dot(d, cross(w1, perp)) + dot(perp, v2 + cross(w2, r2) - v1 - cross(w1, r1)) -// = -dot(perp, v1) - dot(cross(d + r1, perp), w1) + dot(perp, v2) + dot(cross(r2, perp), v2) -// J = [-perp, -cross(d + r1, perp), perp, cross(r2,perp)] -// -// Angular constraint -// C = a2 - a1 + a_initial -// Cdot = w2 - w1 -// J = [0 0 -1 0 0 1] -// -// K = J * invM * JT -// -// J = [-a -s1 a s2] -// [0 -1 0 1] -// a = perp -// s1 = cross(d + r1, a) = cross(p2 - x1, a) -// s2 = cross(r2, a) = cross(p2 - x2, a) - - -// Motor/Limit linear constraint -// C = dot(ax1, d) -// Cdot = = -dot(ax1, v1) - dot(cross(d + r1, ax1), w1) + dot(ax1, v2) + dot(cross(r2, ax1), v2) -// J = [-ax1 -cross(d+r1,ax1) ax1 cross(r2,ax1)] - -// Block Solver -// We develop a block solver that includes the joint limit. This makes the limit stiff (inelastic) even -// when the mass has poor distribution (leading to large torques about the joint anchor points). -// -// The Jacobian has 3 rows: -// J = [-uT -s1 uT s2] // linear -// [0 -1 0 1] // angular -// [-vT -a1 vT a2] // limit -// -// u = perp -// v = axis -// s1 = cross(d + r1, u), s2 = cross(r2, u) -// a1 = cross(d + r1, v), a2 = cross(r2, v) - -// M * (v2 - v1) = JT * df -// J * v2 = bias -// -// v2 = v1 + invM * JT * df -// J * (v1 + invM * JT * df) = bias -// K * df = bias - J * v1 = -Cdot -// K = J * invM * JT -// Cdot = J * v1 - bias -// -// Now solve for f2. -// df = f2 - f1 -// K * (f2 - f1) = -Cdot -// f2 = invK * (-Cdot) + f1 -// -// Clamp accumulated limit impulse. -// lower: f2(3) = max(f2(3), 0) -// upper: f2(3) = min(f2(3), 0) -// -// Solve for correct f2(1:2) -// K(1:2, 1:2) * f2(1:2) = -Cdot(1:2) - K(1:2,3) * f2(3) + K(1:2,1:3) * f1 -// = -Cdot(1:2) - K(1:2,3) * f2(3) + K(1:2,1:2) * f1(1:2) + K(1:2,3) * f1(3) -// K(1:2, 1:2) * f2(1:2) = -Cdot(1:2) - K(1:2,3) * (f2(3) - f1(3)) + K(1:2,1:2) * f1(1:2) -// f2(1:2) = invK(1:2,1:2) * (-Cdot(1:2) - K(1:2,3) * (f2(3) - f1(3))) + f1(1:2) -// -// Now compute impulse to be applied: -// df = f2 - f1 - -void b2PrismaticJointDef::Initialize(b2Body* bA, b2Body* bB, const b2Vec2& anchor, const b2Vec2& axis) -{ - bodyA = bA; - bodyB = bB; - localAnchorA = bodyA->GetLocalPoint(anchor); - localAnchorB = bodyB->GetLocalPoint(anchor); - localAxisA = bodyA->GetLocalVector(axis); - referenceAngle = bodyB->GetAngle() - bodyA->GetAngle(); -} - -b2PrismaticJoint::b2PrismaticJoint(const b2PrismaticJointDef* def) -: b2Joint(def) -{ - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - m_localXAxisA = def->localAxisA; - m_localXAxisA.Normalize(); - m_localYAxisA = b2Cross(1.0f, m_localXAxisA); - m_referenceAngle = def->referenceAngle; - - m_impulse.SetZero(); - m_motorMass = 0.0f; - m_motorImpulse = 0.0f; - - m_lowerTranslation = def->lowerTranslation; - m_upperTranslation = def->upperTranslation; - m_maxMotorForce = def->maxMotorForce; - m_motorSpeed = def->motorSpeed; - m_enableLimit = def->enableLimit; - m_enableMotor = def->enableMotor; - m_limitState = e_inactiveLimit; - - m_axis.SetZero(); - m_perp.SetZero(); -} - -void b2PrismaticJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - // Compute the effective masses. - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - b2Vec2 d = (cB - cA) + rB - rA; - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - // Compute motor Jacobian and effective mass. - { - m_axis = b2Mul(qA, m_localXAxisA); - m_a1 = b2Cross(d + rA, m_axis); - m_a2 = b2Cross(rB, m_axis); - - m_motorMass = mA + mB + iA * m_a1 * m_a1 + iB * m_a2 * m_a2; - if (m_motorMass > 0.0f) - { - m_motorMass = 1.0f / m_motorMass; - } - } - - // Prismatic constraint. - { - m_perp = b2Mul(qA, m_localYAxisA); - - m_s1 = b2Cross(d + rA, m_perp); - m_s2 = b2Cross(rB, m_perp); - - float32 k11 = mA + mB + iA * m_s1 * m_s1 + iB * m_s2 * m_s2; - float32 k12 = iA * m_s1 + iB * m_s2; - float32 k13 = iA * m_s1 * m_a1 + iB * m_s2 * m_a2; - float32 k22 = iA + iB; - if (k22 == 0.0f) - { - // For bodies with fixed rotation. - k22 = 1.0f; - } - float32 k23 = iA * m_a1 + iB * m_a2; - float32 k33 = mA + mB + iA * m_a1 * m_a1 + iB * m_a2 * m_a2; - - m_K.ex.Set(k11, k12, k13); - m_K.ey.Set(k12, k22, k23); - m_K.ez.Set(k13, k23, k33); - } - - // Compute motor and limit terms. - if (m_enableLimit) - { - float32 jointTranslation = b2Dot(m_axis, d); - if (b2Abs(m_upperTranslation - m_lowerTranslation) < 2.0f * b2_linearSlop) - { - m_limitState = e_equalLimits; - } - else if (jointTranslation <= m_lowerTranslation) - { - if (m_limitState != e_atLowerLimit) - { - m_limitState = e_atLowerLimit; - m_impulse.z = 0.0f; - } - } - else if (jointTranslation >= m_upperTranslation) - { - if (m_limitState != e_atUpperLimit) - { - m_limitState = e_atUpperLimit; - m_impulse.z = 0.0f; - } - } - else - { - m_limitState = e_inactiveLimit; - m_impulse.z = 0.0f; - } - } - else - { - m_limitState = e_inactiveLimit; - m_impulse.z = 0.0f; - } - - if (m_enableMotor == false) - { - m_motorImpulse = 0.0f; - } - - if (data.step.warmStarting) - { - // Account for variable time step. - m_impulse *= data.step.dtRatio; - m_motorImpulse *= data.step.dtRatio; - - b2Vec2 P = m_impulse.x * m_perp + (m_motorImpulse + m_impulse.z) * m_axis; - float32 LA = m_impulse.x * m_s1 + m_impulse.y + (m_motorImpulse + m_impulse.z) * m_a1; - float32 LB = m_impulse.x * m_s2 + m_impulse.y + (m_motorImpulse + m_impulse.z) * m_a2; - - vA -= mA * P; - wA -= iA * LA; - - vB += mB * P; - wB += iB * LB; - } - else - { - m_impulse.SetZero(); - m_motorImpulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2PrismaticJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - // Solve linear motor constraint. - if (m_enableMotor && m_limitState != e_equalLimits) - { - float32 Cdot = b2Dot(m_axis, vB - vA) + m_a2 * wB - m_a1 * wA; - float32 impulse = m_motorMass * (m_motorSpeed - Cdot); - float32 oldImpulse = m_motorImpulse; - float32 maxImpulse = data.step.dt * m_maxMotorForce; - m_motorImpulse = b2Clamp(m_motorImpulse + impulse, -maxImpulse, maxImpulse); - impulse = m_motorImpulse - oldImpulse; - - b2Vec2 P = impulse * m_axis; - float32 LA = impulse * m_a1; - float32 LB = impulse * m_a2; - - vA -= mA * P; - wA -= iA * LA; - - vB += mB * P; - wB += iB * LB; - } - - b2Vec2 Cdot1; - Cdot1.x = b2Dot(m_perp, vB - vA) + m_s2 * wB - m_s1 * wA; - Cdot1.y = wB - wA; - - if (m_enableLimit && m_limitState != e_inactiveLimit) - { - // Solve prismatic and limit constraint in block form. - float32 Cdot2; - Cdot2 = b2Dot(m_axis, vB - vA) + m_a2 * wB - m_a1 * wA; - b2Vec3 Cdot(Cdot1.x, Cdot1.y, Cdot2); - - b2Vec3 f1 = m_impulse; - b2Vec3 df = m_K.Solve33(-Cdot); - m_impulse += df; - - if (m_limitState == e_atLowerLimit) - { - m_impulse.z = b2Max(m_impulse.z, 0.0f); - } - else if (m_limitState == e_atUpperLimit) - { - m_impulse.z = b2Min(m_impulse.z, 0.0f); - } - - // f2(1:2) = invK(1:2,1:2) * (-Cdot(1:2) - K(1:2,3) * (f2(3) - f1(3))) + f1(1:2) - b2Vec2 b = -Cdot1 - (m_impulse.z - f1.z) * b2Vec2(m_K.ez.x, m_K.ez.y); - b2Vec2 f2r = m_K.Solve22(b) + b2Vec2(f1.x, f1.y); - m_impulse.x = f2r.x; - m_impulse.y = f2r.y; - - df = m_impulse - f1; - - b2Vec2 P = df.x * m_perp + df.z * m_axis; - float32 LA = df.x * m_s1 + df.y + df.z * m_a1; - float32 LB = df.x * m_s2 + df.y + df.z * m_a2; - - vA -= mA * P; - wA -= iA * LA; - - vB += mB * P; - wB += iB * LB; - } - else - { - // Limit is inactive, just solve the prismatic constraint in block form. - b2Vec2 df = m_K.Solve22(-Cdot1); - m_impulse.x += df.x; - m_impulse.y += df.y; - - b2Vec2 P = df.x * m_perp; - float32 LA = df.x * m_s1 + df.y; - float32 LB = df.x * m_s2 + df.y; - - vA -= mA * P; - wA -= iA * LA; - - vB += mB * P; - wB += iB * LB; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -// A velocity based solver computes reaction forces(impulses) using the velocity constraint solver.Under this context, -// the position solver is not there to resolve forces.It is only there to cope with integration error. -// -// Therefore, the pseudo impulses in the position solver do not have any physical meaning.Thus it is okay if they suck. -// -// We could take the active state from the velocity solver.However, the joint might push past the limit when the velocity -// solver indicates the limit is inactive. -bool b2PrismaticJoint::SolvePositionConstraints(const b2SolverData& data) -{ - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - - b2Rot qA(aA), qB(aB); - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - // Compute fresh Jacobians - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - b2Vec2 d = cB + rB - cA - rA; - - b2Vec2 axis = b2Mul(qA, m_localXAxisA); - float32 a1 = b2Cross(d + rA, axis); - float32 a2 = b2Cross(rB, axis); - b2Vec2 perp = b2Mul(qA, m_localYAxisA); - - float32 s1 = b2Cross(d + rA, perp); - float32 s2 = b2Cross(rB, perp); - - b2Vec3 impulse; - b2Vec2 C1; - C1.x = b2Dot(perp, d); - C1.y = aB - aA - m_referenceAngle; - - float32 linearError = b2Abs(C1.x); - float32 angularError = b2Abs(C1.y); - - bool active = false; - float32 C2 = 0.0f; - if (m_enableLimit) - { - float32 translation = b2Dot(axis, d); - if (b2Abs(m_upperTranslation - m_lowerTranslation) < 2.0f * b2_linearSlop) - { - // Prevent large angular corrections - C2 = b2Clamp(translation, -b2_maxLinearCorrection, b2_maxLinearCorrection); - linearError = b2Max(linearError, b2Abs(translation)); - active = true; - } - else if (translation <= m_lowerTranslation) - { - // Prevent large linear corrections and allow some slop. - C2 = b2Clamp(translation - m_lowerTranslation + b2_linearSlop, -b2_maxLinearCorrection, 0.0f); - linearError = b2Max(linearError, m_lowerTranslation - translation); - active = true; - } - else if (translation >= m_upperTranslation) - { - // Prevent large linear corrections and allow some slop. - C2 = b2Clamp(translation - m_upperTranslation - b2_linearSlop, 0.0f, b2_maxLinearCorrection); - linearError = b2Max(linearError, translation - m_upperTranslation); - active = true; - } - } - - if (active) - { - float32 k11 = mA + mB + iA * s1 * s1 + iB * s2 * s2; - float32 k12 = iA * s1 + iB * s2; - float32 k13 = iA * s1 * a1 + iB * s2 * a2; - float32 k22 = iA + iB; - if (k22 == 0.0f) - { - // For fixed rotation - k22 = 1.0f; - } - float32 k23 = iA * a1 + iB * a2; - float32 k33 = mA + mB + iA * a1 * a1 + iB * a2 * a2; - - b2Mat33 K; - K.ex.Set(k11, k12, k13); - K.ey.Set(k12, k22, k23); - K.ez.Set(k13, k23, k33); - - b2Vec3 C; - C.x = C1.x; - C.y = C1.y; - C.z = C2; - - impulse = K.Solve33(-C); - } - else - { - float32 k11 = mA + mB + iA * s1 * s1 + iB * s2 * s2; - float32 k12 = iA * s1 + iB * s2; - float32 k22 = iA + iB; - if (k22 == 0.0f) - { - k22 = 1.0f; - } - - b2Mat22 K; - K.ex.Set(k11, k12); - K.ey.Set(k12, k22); - - b2Vec2 impulse1 = K.Solve(-C1); - impulse.x = impulse1.x; - impulse.y = impulse1.y; - impulse.z = 0.0f; - } - - b2Vec2 P = impulse.x * perp + impulse.z * axis; - float32 LA = impulse.x * s1 + impulse.y + impulse.z * a1; - float32 LB = impulse.x * s2 + impulse.y + impulse.z * a2; - - cA -= mA * P; - aA -= iA * LA; - cB += mB * P; - aB += iB * LB; - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - - return linearError <= b2_linearSlop && angularError <= b2_angularSlop; -} - -b2Vec2 b2PrismaticJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2PrismaticJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2PrismaticJoint::GetReactionForce(float32 inv_dt) const -{ - return inv_dt * (m_impulse.x * m_perp + (m_motorImpulse + m_impulse.z) * m_axis); -} - -float32 b2PrismaticJoint::GetReactionTorque(float32 inv_dt) const -{ - return inv_dt * m_impulse.y; -} - -float32 b2PrismaticJoint::GetJointTranslation() const -{ - b2Vec2 pA = m_bodyA->GetWorldPoint(m_localAnchorA); - b2Vec2 pB = m_bodyB->GetWorldPoint(m_localAnchorB); - b2Vec2 d = pB - pA; - b2Vec2 axis = m_bodyA->GetWorldVector(m_localXAxisA); - - float32 translation = b2Dot(d, axis); - return translation; -} - -float32 b2PrismaticJoint::GetJointSpeed() const -{ - b2Body* bA = m_bodyA; - b2Body* bB = m_bodyB; - - b2Vec2 rA = b2Mul(bA->m_xf.q, m_localAnchorA - bA->m_sweep.localCenter); - b2Vec2 rB = b2Mul(bB->m_xf.q, m_localAnchorB - bB->m_sweep.localCenter); - b2Vec2 p1 = bA->m_sweep.c + rA; - b2Vec2 p2 = bB->m_sweep.c + rB; - b2Vec2 d = p2 - p1; - b2Vec2 axis = b2Mul(bA->m_xf.q, m_localXAxisA); - - b2Vec2 vA = bA->m_linearVelocity; - b2Vec2 vB = bB->m_linearVelocity; - float32 wA = bA->m_angularVelocity; - float32 wB = bB->m_angularVelocity; - - float32 speed = b2Dot(d, b2Cross(wA, axis)) + b2Dot(axis, vB + b2Cross(wB, rB) - vA - b2Cross(wA, rA)); - return speed; -} - -bool b2PrismaticJoint::IsLimitEnabled() const -{ - return m_enableLimit; -} - -void b2PrismaticJoint::EnableLimit(bool flag) -{ - if (flag != m_enableLimit) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_enableLimit = flag; - m_impulse.z = 0.0f; - } -} - -float32 b2PrismaticJoint::GetLowerLimit() const -{ - return m_lowerTranslation; -} - -float32 b2PrismaticJoint::GetUpperLimit() const -{ - return m_upperTranslation; -} - -void b2PrismaticJoint::SetLimits(float32 lower, float32 upper) -{ - b2Assert(lower <= upper); - if (lower != m_lowerTranslation || upper != m_upperTranslation) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_lowerTranslation = lower; - m_upperTranslation = upper; - m_impulse.z = 0.0f; - } -} - -bool b2PrismaticJoint::IsMotorEnabled() const -{ - return m_enableMotor; -} - -void b2PrismaticJoint::EnableMotor(bool flag) -{ - if (flag != m_enableMotor) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_enableMotor = flag; - } -} - -void b2PrismaticJoint::SetMotorSpeed(float32 speed) -{ - if (speed != m_motorSpeed) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_motorSpeed = speed; - } -} - -void b2PrismaticJoint::SetMaxMotorForce(float32 force) -{ - if (force != m_maxMotorForce) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_maxMotorForce = force; - } -} - -float32 b2PrismaticJoint::GetMotorForce(float32 inv_dt) const -{ - return inv_dt * m_motorImpulse; -} - -void b2PrismaticJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2PrismaticJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.localAxisA.Set(%.15lef, %.15lef);\n", m_localXAxisA.x, m_localXAxisA.y); - b2Log(" jd.referenceAngle = %.15lef;\n", m_referenceAngle); - b2Log(" jd.enableLimit = bool(%d);\n", m_enableLimit); - b2Log(" jd.lowerTranslation = %.15lef;\n", m_lowerTranslation); - b2Log(" jd.upperTranslation = %.15lef;\n", m_upperTranslation); - b2Log(" jd.enableMotor = bool(%d);\n", m_enableMotor); - b2Log(" jd.motorSpeed = %.15lef;\n", m_motorSpeed); - b2Log(" jd.maxMotorForce = %.15lef;\n", m_maxMotorForce); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2PrismaticJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2PrismaticJoint.h deleted file mode 100644 index 131dffd..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2PrismaticJoint.h +++ /dev/null @@ -1,196 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_PRISMATIC_JOINT_H -#define B2_PRISMATIC_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Prismatic joint definition. This requires defining a line of -/// motion using an axis and an anchor point. The definition uses local -/// anchor points and a local axis so that the initial configuration -/// can violate the constraint slightly. The joint translation is zero -/// when the local anchor points coincide in world space. Using local -/// anchors and a local axis helps when saving and loading a game. -struct b2PrismaticJointDef : public b2JointDef -{ - b2PrismaticJointDef() - { - type = e_prismaticJoint; - localAnchorA.SetZero(); - localAnchorB.SetZero(); - localAxisA.Set(1.0f, 0.0f); - referenceAngle = 0.0f; - enableLimit = false; - lowerTranslation = 0.0f; - upperTranslation = 0.0f; - enableMotor = false; - maxMotorForce = 0.0f; - motorSpeed = 0.0f; - } - - /// Initialize the bodies, anchors, axis, and reference angle using the world - /// anchor and unit world axis. - void Initialize(b2Body* bodyA, b2Body* bodyB, const b2Vec2& anchor, const b2Vec2& axis); - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The local translation unit axis in bodyA. - b2Vec2 localAxisA; - - /// The constrained angle between the bodies: bodyB_angle - bodyA_angle. - float32 referenceAngle; - - /// Enable/disable the joint limit. - bool enableLimit; - - /// The lower translation limit, usually in meters. - float32 lowerTranslation; - - /// The upper translation limit, usually in meters. - float32 upperTranslation; - - /// Enable/disable the joint motor. - bool enableMotor; - - /// The maximum motor torque, usually in N-m. - float32 maxMotorForce; - - /// The desired motor speed in radians per second. - float32 motorSpeed; -}; - -/// A prismatic joint. This joint provides one degree of freedom: translation -/// along an axis fixed in bodyA. Relative rotation is prevented. You can -/// use a joint limit to restrict the range of motion and a joint motor to -/// drive the motion or to model joint friction. -class b2PrismaticJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// The local anchor point relative to bodyA's origin. - const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; } - - /// The local anchor point relative to bodyB's origin. - const b2Vec2& GetLocalAnchorB() const { return m_localAnchorB; } - - /// The local joint axis relative to bodyA. - const b2Vec2& GetLocalAxisA() const { return m_localXAxisA; } - - /// Get the reference angle. - float32 GetReferenceAngle() const { return m_referenceAngle; } - - /// Get the current joint translation, usually in meters. - float32 GetJointTranslation() const; - - /// Get the current joint translation speed, usually in meters per second. - float32 GetJointSpeed() const; - - /// Is the joint limit enabled? - bool IsLimitEnabled() const; - - /// Enable/disable the joint limit. - void EnableLimit(bool flag); - - /// Get the lower joint limit, usually in meters. - float32 GetLowerLimit() const; - - /// Get the upper joint limit, usually in meters. - float32 GetUpperLimit() const; - - /// Set the joint limits, usually in meters. - void SetLimits(float32 lower, float32 upper); - - /// Is the joint motor enabled? - bool IsMotorEnabled() const; - - /// Enable/disable the joint motor. - void EnableMotor(bool flag); - - /// Set the motor speed, usually in meters per second. - void SetMotorSpeed(float32 speed); - - /// Get the motor speed, usually in meters per second. - float32 GetMotorSpeed() const; - - /// Set the maximum motor force, usually in N. - void SetMaxMotorForce(float32 force); - float32 GetMaxMotorForce() const { return m_maxMotorForce; } - - /// Get the current motor force given the inverse time step, usually in N. - float32 GetMotorForce(float32 inv_dt) const; - - /// Dump to b2Log - void Dump() override; - -protected: - friend class b2Joint; - friend class b2GearJoint; - b2PrismaticJoint(const b2PrismaticJointDef* def); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - b2Vec2 m_localXAxisA; - b2Vec2 m_localYAxisA; - float32 m_referenceAngle; - b2Vec3 m_impulse; - float32 m_motorImpulse; - float32 m_lowerTranslation; - float32 m_upperTranslation; - float32 m_maxMotorForce; - float32 m_motorSpeed; - bool m_enableLimit; - bool m_enableMotor; - b2LimitState m_limitState; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - b2Vec2 m_axis, m_perp; - float32 m_s1, m_s2; - float32 m_a1, m_a2; - b2Mat33 m_K; - float32 m_motorMass; -}; - -inline float32 b2PrismaticJoint::GetMotorSpeed() const -{ - return m_motorSpeed; -} - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2PulleyJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2PulleyJoint.cpp deleted file mode 100644 index 1525f41..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2PulleyJoint.cpp +++ /dev/null @@ -1,348 +0,0 @@ -/* -* Copyright (c) 2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2PulleyJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Pulley: -// length1 = norm(p1 - s1) -// length2 = norm(p2 - s2) -// C0 = (length1 + ratio * length2)_initial -// C = C0 - (length1 + ratio * length2) -// u1 = (p1 - s1) / norm(p1 - s1) -// u2 = (p2 - s2) / norm(p2 - s2) -// Cdot = -dot(u1, v1 + cross(w1, r1)) - ratio * dot(u2, v2 + cross(w2, r2)) -// J = -[u1 cross(r1, u1) ratio * u2 ratio * cross(r2, u2)] -// K = J * invM * JT -// = invMass1 + invI1 * cross(r1, u1)^2 + ratio^2 * (invMass2 + invI2 * cross(r2, u2)^2) - -void b2PulleyJointDef::Initialize(b2Body* bA, b2Body* bB, - const b2Vec2& groundA, const b2Vec2& groundB, - const b2Vec2& anchorA, const b2Vec2& anchorB, - float32 r) -{ - bodyA = bA; - bodyB = bB; - groundAnchorA = groundA; - groundAnchorB = groundB; - localAnchorA = bodyA->GetLocalPoint(anchorA); - localAnchorB = bodyB->GetLocalPoint(anchorB); - b2Vec2 dA = anchorA - groundA; - lengthA = dA.Length(); - b2Vec2 dB = anchorB - groundB; - lengthB = dB.Length(); - ratio = r; - b2Assert(ratio > b2_epsilon); -} - -b2PulleyJoint::b2PulleyJoint(const b2PulleyJointDef* def) -: b2Joint(def) -{ - m_groundAnchorA = def->groundAnchorA; - m_groundAnchorB = def->groundAnchorB; - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - - m_lengthA = def->lengthA; - m_lengthB = def->lengthB; - - b2Assert(def->ratio != 0.0f); - m_ratio = def->ratio; - - m_constant = def->lengthA + m_ratio * def->lengthB; - - m_impulse = 0.0f; -} - -void b2PulleyJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - // Get the pulley axes. - m_uA = cA + m_rA - m_groundAnchorA; - m_uB = cB + m_rB - m_groundAnchorB; - - float32 lengthA = m_uA.Length(); - float32 lengthB = m_uB.Length(); - - if (lengthA > 10.0f * b2_linearSlop) - { - m_uA *= 1.0f / lengthA; - } - else - { - m_uA.SetZero(); - } - - if (lengthB > 10.0f * b2_linearSlop) - { - m_uB *= 1.0f / lengthB; - } - else - { - m_uB.SetZero(); - } - - // Compute effective mass. - float32 ruA = b2Cross(m_rA, m_uA); - float32 ruB = b2Cross(m_rB, m_uB); - - float32 mA = m_invMassA + m_invIA * ruA * ruA; - float32 mB = m_invMassB + m_invIB * ruB * ruB; - - m_mass = mA + m_ratio * m_ratio * mB; - - if (m_mass > 0.0f) - { - m_mass = 1.0f / m_mass; - } - - if (data.step.warmStarting) - { - // Scale impulses to support variable time steps. - m_impulse *= data.step.dtRatio; - - // Warm starting. - b2Vec2 PA = -(m_impulse) * m_uA; - b2Vec2 PB = (-m_ratio * m_impulse) * m_uB; - - vA += m_invMassA * PA; - wA += m_invIA * b2Cross(m_rA, PA); - vB += m_invMassB * PB; - wB += m_invIB * b2Cross(m_rB, PB); - } - else - { - m_impulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2PulleyJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Vec2 vpA = vA + b2Cross(wA, m_rA); - b2Vec2 vpB = vB + b2Cross(wB, m_rB); - - float32 Cdot = -b2Dot(m_uA, vpA) - m_ratio * b2Dot(m_uB, vpB); - float32 impulse = -m_mass * Cdot; - m_impulse += impulse; - - b2Vec2 PA = -impulse * m_uA; - b2Vec2 PB = -m_ratio * impulse * m_uB; - vA += m_invMassA * PA; - wA += m_invIA * b2Cross(m_rA, PA); - vB += m_invMassB * PB; - wB += m_invIB * b2Cross(m_rB, PB); - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2PulleyJoint::SolvePositionConstraints(const b2SolverData& data) -{ - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - - b2Rot qA(aA), qB(aB); - - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - // Get the pulley axes. - b2Vec2 uA = cA + rA - m_groundAnchorA; - b2Vec2 uB = cB + rB - m_groundAnchorB; - - float32 lengthA = uA.Length(); - float32 lengthB = uB.Length(); - - if (lengthA > 10.0f * b2_linearSlop) - { - uA *= 1.0f / lengthA; - } - else - { - uA.SetZero(); - } - - if (lengthB > 10.0f * b2_linearSlop) - { - uB *= 1.0f / lengthB; - } - else - { - uB.SetZero(); - } - - // Compute effective mass. - float32 ruA = b2Cross(rA, uA); - float32 ruB = b2Cross(rB, uB); - - float32 mA = m_invMassA + m_invIA * ruA * ruA; - float32 mB = m_invMassB + m_invIB * ruB * ruB; - - float32 mass = mA + m_ratio * m_ratio * mB; - - if (mass > 0.0f) - { - mass = 1.0f / mass; - } - - float32 C = m_constant - lengthA - m_ratio * lengthB; - float32 linearError = b2Abs(C); - - float32 impulse = -mass * C; - - b2Vec2 PA = -impulse * uA; - b2Vec2 PB = -m_ratio * impulse * uB; - - cA += m_invMassA * PA; - aA += m_invIA * b2Cross(rA, PA); - cB += m_invMassB * PB; - aB += m_invIB * b2Cross(rB, PB); - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - - return linearError < b2_linearSlop; -} - -b2Vec2 b2PulleyJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2PulleyJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2PulleyJoint::GetReactionForce(float32 inv_dt) const -{ - b2Vec2 P = m_impulse * m_uB; - return inv_dt * P; -} - -float32 b2PulleyJoint::GetReactionTorque(float32 inv_dt) const -{ - B2_NOT_USED(inv_dt); - return 0.0f; -} - -b2Vec2 b2PulleyJoint::GetGroundAnchorA() const -{ - return m_groundAnchorA; -} - -b2Vec2 b2PulleyJoint::GetGroundAnchorB() const -{ - return m_groundAnchorB; -} - -float32 b2PulleyJoint::GetLengthA() const -{ - return m_lengthA; -} - -float32 b2PulleyJoint::GetLengthB() const -{ - return m_lengthB; -} - -float32 b2PulleyJoint::GetRatio() const -{ - return m_ratio; -} - -float32 b2PulleyJoint::GetCurrentLengthA() const -{ - b2Vec2 p = m_bodyA->GetWorldPoint(m_localAnchorA); - b2Vec2 s = m_groundAnchorA; - b2Vec2 d = p - s; - return d.Length(); -} - -float32 b2PulleyJoint::GetCurrentLengthB() const -{ - b2Vec2 p = m_bodyB->GetWorldPoint(m_localAnchorB); - b2Vec2 s = m_groundAnchorB; - b2Vec2 d = p - s; - return d.Length(); -} - -void b2PulleyJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2PulleyJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.groundAnchorA.Set(%.15lef, %.15lef);\n", m_groundAnchorA.x, m_groundAnchorA.y); - b2Log(" jd.groundAnchorB.Set(%.15lef, %.15lef);\n", m_groundAnchorB.x, m_groundAnchorB.y); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.lengthA = %.15lef;\n", m_lengthA); - b2Log(" jd.lengthB = %.15lef;\n", m_lengthB); - b2Log(" jd.ratio = %.15lef;\n", m_ratio); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} - -void b2PulleyJoint::ShiftOrigin(const b2Vec2& newOrigin) -{ - m_groundAnchorA -= newOrigin; - m_groundAnchorB -= newOrigin; -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2PulleyJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2PulleyJoint.h deleted file mode 100644 index 71c759b..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2PulleyJoint.h +++ /dev/null @@ -1,152 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_PULLEY_JOINT_H -#define B2_PULLEY_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -const float32 b2_minPulleyLength = 2.0f; - -/// Pulley joint definition. This requires two ground anchors, -/// two dynamic body anchor points, and a pulley ratio. -struct b2PulleyJointDef : public b2JointDef -{ - b2PulleyJointDef() - { - type = e_pulleyJoint; - groundAnchorA.Set(-1.0f, 1.0f); - groundAnchorB.Set(1.0f, 1.0f); - localAnchorA.Set(-1.0f, 0.0f); - localAnchorB.Set(1.0f, 0.0f); - lengthA = 0.0f; - lengthB = 0.0f; - ratio = 1.0f; - collideConnected = true; - } - - /// Initialize the bodies, anchors, lengths, max lengths, and ratio using the world anchors. - void Initialize(b2Body* bodyA, b2Body* bodyB, - const b2Vec2& groundAnchorA, const b2Vec2& groundAnchorB, - const b2Vec2& anchorA, const b2Vec2& anchorB, - float32 ratio); - - /// The first ground anchor in world coordinates. This point never moves. - b2Vec2 groundAnchorA; - - /// The second ground anchor in world coordinates. This point never moves. - b2Vec2 groundAnchorB; - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The a reference length for the segment attached to bodyA. - float32 lengthA; - - /// The a reference length for the segment attached to bodyB. - float32 lengthB; - - /// The pulley ratio, used to simulate a block-and-tackle. - float32 ratio; -}; - -/// The pulley joint is connected to two bodies and two fixed ground points. -/// The pulley supports a ratio such that: -/// length1 + ratio * length2 <= constant -/// Yes, the force transmitted is scaled by the ratio. -/// Warning: the pulley joint can get a bit squirrelly by itself. They often -/// work better when combined with prismatic joints. You should also cover the -/// the anchor points with static shapes to prevent one side from going to -/// zero length. -class b2PulleyJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// Get the first ground anchor. - b2Vec2 GetGroundAnchorA() const; - - /// Get the second ground anchor. - b2Vec2 GetGroundAnchorB() const; - - /// Get the current length of the segment attached to bodyA. - float32 GetLengthA() const; - - /// Get the current length of the segment attached to bodyB. - float32 GetLengthB() const; - - /// Get the pulley ratio. - float32 GetRatio() const; - - /// Get the current length of the segment attached to bodyA. - float32 GetCurrentLengthA() const; - - /// Get the current length of the segment attached to bodyB. - float32 GetCurrentLengthB() const; - - /// Dump joint to dmLog - void Dump() override; - - /// Implement b2Joint::ShiftOrigin - void ShiftOrigin(const b2Vec2& newOrigin) override; - -protected: - - friend class b2Joint; - b2PulleyJoint(const b2PulleyJointDef* data); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - b2Vec2 m_groundAnchorA; - b2Vec2 m_groundAnchorB; - float32 m_lengthA; - float32 m_lengthB; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - float32 m_constant; - float32 m_ratio; - float32 m_impulse; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_uA; - b2Vec2 m_uB; - b2Vec2 m_rA; - b2Vec2 m_rB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - float32 m_mass; -}; - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2RevoluteJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2RevoluteJoint.cpp deleted file mode 100644 index b3f7ee5..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2RevoluteJoint.cpp +++ /dev/null @@ -1,511 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2RevoluteJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Point-to-point constraint -// C = p2 - p1 -// Cdot = v2 - v1 -// = v2 + cross(w2, r2) - v1 - cross(w1, r1) -// J = [-I -r1_skew I r2_skew ] -// Identity used: -// w k % (rx i + ry j) = w * (-ry i + rx j) - -// Motor constraint -// Cdot = w2 - w1 -// J = [0 0 -1 0 0 1] -// K = invI1 + invI2 - -void b2RevoluteJointDef::Initialize(b2Body* bA, b2Body* bB, const b2Vec2& anchor) -{ - bodyA = bA; - bodyB = bB; - localAnchorA = bodyA->GetLocalPoint(anchor); - localAnchorB = bodyB->GetLocalPoint(anchor); - referenceAngle = bodyB->GetAngle() - bodyA->GetAngle(); -} - -b2RevoluteJoint::b2RevoluteJoint(const b2RevoluteJointDef* def) -: b2Joint(def) -{ - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - m_referenceAngle = def->referenceAngle; - - m_impulse.SetZero(); - m_motorImpulse = 0.0f; - - m_lowerAngle = def->lowerAngle; - m_upperAngle = def->upperAngle; - m_maxMotorTorque = def->maxMotorTorque; - m_motorSpeed = def->motorSpeed; - m_enableLimit = def->enableLimit; - m_enableMotor = def->enableMotor; - m_limitState = e_inactiveLimit; -} - -void b2RevoluteJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - // J = [-I -r1_skew I r2_skew] - // [ 0 -1 0 1] - // r_skew = [-ry; rx] - - // Matlab - // K = [ mA+r1y^2*iA+mB+r2y^2*iB, -r1y*iA*r1x-r2y*iB*r2x, -r1y*iA-r2y*iB] - // [ -r1y*iA*r1x-r2y*iB*r2x, mA+r1x^2*iA+mB+r2x^2*iB, r1x*iA+r2x*iB] - // [ -r1y*iA-r2y*iB, r1x*iA+r2x*iB, iA+iB] - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - bool fixedRotation = (iA + iB == 0.0f); - - m_mass.ex.x = mA + mB + m_rA.y * m_rA.y * iA + m_rB.y * m_rB.y * iB; - m_mass.ey.x = -m_rA.y * m_rA.x * iA - m_rB.y * m_rB.x * iB; - m_mass.ez.x = -m_rA.y * iA - m_rB.y * iB; - m_mass.ex.y = m_mass.ey.x; - m_mass.ey.y = mA + mB + m_rA.x * m_rA.x * iA + m_rB.x * m_rB.x * iB; - m_mass.ez.y = m_rA.x * iA + m_rB.x * iB; - m_mass.ex.z = m_mass.ez.x; - m_mass.ey.z = m_mass.ez.y; - m_mass.ez.z = iA + iB; - - m_motorMass = iA + iB; - if (m_motorMass > 0.0f) - { - m_motorMass = 1.0f / m_motorMass; - } - - if (m_enableMotor == false || fixedRotation) - { - m_motorImpulse = 0.0f; - } - - if (m_enableLimit && fixedRotation == false) - { - float32 jointAngle = aB - aA - m_referenceAngle; - if (b2Abs(m_upperAngle - m_lowerAngle) < 2.0f * b2_angularSlop) - { - m_limitState = e_equalLimits; - } - else if (jointAngle <= m_lowerAngle) - { - if (m_limitState != e_atLowerLimit) - { - m_impulse.z = 0.0f; - } - m_limitState = e_atLowerLimit; - } - else if (jointAngle >= m_upperAngle) - { - if (m_limitState != e_atUpperLimit) - { - m_impulse.z = 0.0f; - } - m_limitState = e_atUpperLimit; - } - else - { - m_limitState = e_inactiveLimit; - m_impulse.z = 0.0f; - } - } - else - { - m_limitState = e_inactiveLimit; - } - - if (data.step.warmStarting) - { - // Scale impulses to support a variable time step. - m_impulse *= data.step.dtRatio; - m_motorImpulse *= data.step.dtRatio; - - b2Vec2 P(m_impulse.x, m_impulse.y); - - vA -= mA * P; - wA -= iA * (b2Cross(m_rA, P) + m_motorImpulse + m_impulse.z); - - vB += mB * P; - wB += iB * (b2Cross(m_rB, P) + m_motorImpulse + m_impulse.z); - } - else - { - m_impulse.SetZero(); - m_motorImpulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2RevoluteJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - bool fixedRotation = (iA + iB == 0.0f); - - // Solve motor constraint. - if (m_enableMotor && m_limitState != e_equalLimits && fixedRotation == false) - { - float32 Cdot = wB - wA - m_motorSpeed; - float32 impulse = -m_motorMass * Cdot; - float32 oldImpulse = m_motorImpulse; - float32 maxImpulse = data.step.dt * m_maxMotorTorque; - m_motorImpulse = b2Clamp(m_motorImpulse + impulse, -maxImpulse, maxImpulse); - impulse = m_motorImpulse - oldImpulse; - - wA -= iA * impulse; - wB += iB * impulse; - } - - // Solve limit constraint. - if (m_enableLimit && m_limitState != e_inactiveLimit && fixedRotation == false) - { - b2Vec2 Cdot1 = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA); - float32 Cdot2 = wB - wA; - b2Vec3 Cdot(Cdot1.x, Cdot1.y, Cdot2); - - b2Vec3 impulse = -m_mass.Solve33(Cdot); - - if (m_limitState == e_equalLimits) - { - m_impulse += impulse; - } - else if (m_limitState == e_atLowerLimit) - { - float32 newImpulse = m_impulse.z + impulse.z; - if (newImpulse < 0.0f) - { - b2Vec2 rhs = -Cdot1 + m_impulse.z * b2Vec2(m_mass.ez.x, m_mass.ez.y); - b2Vec2 reduced = m_mass.Solve22(rhs); - impulse.x = reduced.x; - impulse.y = reduced.y; - impulse.z = -m_impulse.z; - m_impulse.x += reduced.x; - m_impulse.y += reduced.y; - m_impulse.z = 0.0f; - } - else - { - m_impulse += impulse; - } - } - else if (m_limitState == e_atUpperLimit) - { - float32 newImpulse = m_impulse.z + impulse.z; - if (newImpulse > 0.0f) - { - b2Vec2 rhs = -Cdot1 + m_impulse.z * b2Vec2(m_mass.ez.x, m_mass.ez.y); - b2Vec2 reduced = m_mass.Solve22(rhs); - impulse.x = reduced.x; - impulse.y = reduced.y; - impulse.z = -m_impulse.z; - m_impulse.x += reduced.x; - m_impulse.y += reduced.y; - m_impulse.z = 0.0f; - } - else - { - m_impulse += impulse; - } - } - - b2Vec2 P(impulse.x, impulse.y); - - vA -= mA * P; - wA -= iA * (b2Cross(m_rA, P) + impulse.z); - - vB += mB * P; - wB += iB * (b2Cross(m_rB, P) + impulse.z); - } - else - { - // Solve point-to-point constraint - b2Vec2 Cdot = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA); - b2Vec2 impulse = m_mass.Solve22(-Cdot); - - m_impulse.x += impulse.x; - m_impulse.y += impulse.y; - - vA -= mA * impulse; - wA -= iA * b2Cross(m_rA, impulse); - - vB += mB * impulse; - wB += iB * b2Cross(m_rB, impulse); - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2RevoluteJoint::SolvePositionConstraints(const b2SolverData& data) -{ - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - - b2Rot qA(aA), qB(aB); - - float32 angularError = 0.0f; - float32 positionError = 0.0f; - - bool fixedRotation = (m_invIA + m_invIB == 0.0f); - - // Solve angular limit constraint. - if (m_enableLimit && m_limitState != e_inactiveLimit && fixedRotation == false) - { - float32 angle = aB - aA - m_referenceAngle; - float32 limitImpulse = 0.0f; - - if (m_limitState == e_equalLimits) - { - // Prevent large angular corrections - float32 C = b2Clamp(angle - m_lowerAngle, -b2_maxAngularCorrection, b2_maxAngularCorrection); - limitImpulse = -m_motorMass * C; - angularError = b2Abs(C); - } - else if (m_limitState == e_atLowerLimit) - { - float32 C = angle - m_lowerAngle; - angularError = -C; - - // Prevent large angular corrections and allow some slop. - C = b2Clamp(C + b2_angularSlop, -b2_maxAngularCorrection, 0.0f); - limitImpulse = -m_motorMass * C; - } - else if (m_limitState == e_atUpperLimit) - { - float32 C = angle - m_upperAngle; - angularError = C; - - // Prevent large angular corrections and allow some slop. - C = b2Clamp(C - b2_angularSlop, 0.0f, b2_maxAngularCorrection); - limitImpulse = -m_motorMass * C; - } - - aA -= m_invIA * limitImpulse; - aB += m_invIB * limitImpulse; - } - - // Solve point-to-point constraint. - { - qA.Set(aA); - qB.Set(aB); - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - b2Vec2 C = cB + rB - cA - rA; - positionError = C.Length(); - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - b2Mat22 K; - K.ex.x = mA + mB + iA * rA.y * rA.y + iB * rB.y * rB.y; - K.ex.y = -iA * rA.x * rA.y - iB * rB.x * rB.y; - K.ey.x = K.ex.y; - K.ey.y = mA + mB + iA * rA.x * rA.x + iB * rB.x * rB.x; - - b2Vec2 impulse = -K.Solve(C); - - cA -= mA * impulse; - aA -= iA * b2Cross(rA, impulse); - - cB += mB * impulse; - aB += iB * b2Cross(rB, impulse); - } - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - - return positionError <= b2_linearSlop && angularError <= b2_angularSlop; -} - -b2Vec2 b2RevoluteJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2RevoluteJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2RevoluteJoint::GetReactionForce(float32 inv_dt) const -{ - b2Vec2 P(m_impulse.x, m_impulse.y); - return inv_dt * P; -} - -float32 b2RevoluteJoint::GetReactionTorque(float32 inv_dt) const -{ - return inv_dt * m_impulse.z; -} - -float32 b2RevoluteJoint::GetJointAngle() const -{ - b2Body* bA = m_bodyA; - b2Body* bB = m_bodyB; - return bB->m_sweep.a - bA->m_sweep.a - m_referenceAngle; -} - -float32 b2RevoluteJoint::GetJointSpeed() const -{ - b2Body* bA = m_bodyA; - b2Body* bB = m_bodyB; - return bB->m_angularVelocity - bA->m_angularVelocity; -} - -bool b2RevoluteJoint::IsMotorEnabled() const -{ - return m_enableMotor; -} - -void b2RevoluteJoint::EnableMotor(bool flag) -{ - if (flag != m_enableMotor) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_enableMotor = flag; - } -} - -float32 b2RevoluteJoint::GetMotorTorque(float32 inv_dt) const -{ - return inv_dt * m_motorImpulse; -} - -void b2RevoluteJoint::SetMotorSpeed(float32 speed) -{ - if (speed != m_motorSpeed) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_motorSpeed = speed; - } -} - -void b2RevoluteJoint::SetMaxMotorTorque(float32 torque) -{ - if (torque != m_maxMotorTorque) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_maxMotorTorque = torque; - } -} - -bool b2RevoluteJoint::IsLimitEnabled() const -{ - return m_enableLimit; -} - -void b2RevoluteJoint::EnableLimit(bool flag) -{ - if (flag != m_enableLimit) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_enableLimit = flag; - m_impulse.z = 0.0f; - } -} - -float32 b2RevoluteJoint::GetLowerLimit() const -{ - return m_lowerAngle; -} - -float32 b2RevoluteJoint::GetUpperLimit() const -{ - return m_upperAngle; -} - -void b2RevoluteJoint::SetLimits(float32 lower, float32 upper) -{ - b2Assert(lower <= upper); - - if (lower != m_lowerAngle || upper != m_upperAngle) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_impulse.z = 0.0f; - m_lowerAngle = lower; - m_upperAngle = upper; - } -} - -void b2RevoluteJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2RevoluteJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.referenceAngle = %.15lef;\n", m_referenceAngle); - b2Log(" jd.enableLimit = bool(%d);\n", m_enableLimit); - b2Log(" jd.lowerAngle = %.15lef;\n", m_lowerAngle); - b2Log(" jd.upperAngle = %.15lef;\n", m_upperAngle); - b2Log(" jd.enableMotor = bool(%d);\n", m_enableMotor); - b2Log(" jd.motorSpeed = %.15lef;\n", m_motorSpeed); - b2Log(" jd.maxMotorTorque = %.15lef;\n", m_maxMotorTorque); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2RevoluteJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2RevoluteJoint.h deleted file mode 100644 index 06b1455..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2RevoluteJoint.h +++ /dev/null @@ -1,204 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_REVOLUTE_JOINT_H -#define B2_REVOLUTE_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Revolute joint definition. This requires defining an -/// anchor point where the bodies are joined. The definition -/// uses local anchor points so that the initial configuration -/// can violate the constraint slightly. You also need to -/// specify the initial relative angle for joint limits. This -/// helps when saving and loading a game. -/// The local anchor points are measured from the body's origin -/// rather than the center of mass because: -/// 1. you might not know where the center of mass will be. -/// 2. if you add/remove shapes from a body and recompute the mass, -/// the joints will be broken. -struct b2RevoluteJointDef : public b2JointDef -{ - b2RevoluteJointDef() - { - type = e_revoluteJoint; - localAnchorA.Set(0.0f, 0.0f); - localAnchorB.Set(0.0f, 0.0f); - referenceAngle = 0.0f; - lowerAngle = 0.0f; - upperAngle = 0.0f; - maxMotorTorque = 0.0f; - motorSpeed = 0.0f; - enableLimit = false; - enableMotor = false; - } - - /// Initialize the bodies, anchors, and reference angle using a world - /// anchor point. - void Initialize(b2Body* bodyA, b2Body* bodyB, const b2Vec2& anchor); - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The bodyB angle minus bodyA angle in the reference state (radians). - float32 referenceAngle; - - /// A flag to enable joint limits. - bool enableLimit; - - /// The lower angle for the joint limit (radians). - float32 lowerAngle; - - /// The upper angle for the joint limit (radians). - float32 upperAngle; - - /// A flag to enable the joint motor. - bool enableMotor; - - /// The desired motor speed. Usually in radians per second. - float32 motorSpeed; - - /// The maximum motor torque used to achieve the desired motor speed. - /// Usually in N-m. - float32 maxMotorTorque; -}; - -/// A revolute joint constrains two bodies to share a common point while they -/// are free to rotate about the point. The relative rotation about the shared -/// point is the joint angle. You can limit the relative rotation with -/// a joint limit that specifies a lower and upper angle. You can use a motor -/// to drive the relative rotation about the shared point. A maximum motor torque -/// is provided so that infinite forces are not generated. -class b2RevoluteJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - /// The local anchor point relative to bodyA's origin. - const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; } - - /// The local anchor point relative to bodyB's origin. - const b2Vec2& GetLocalAnchorB() const { return m_localAnchorB; } - - /// Get the reference angle. - float32 GetReferenceAngle() const { return m_referenceAngle; } - - /// Get the current joint angle in radians. - float32 GetJointAngle() const; - - /// Get the current joint angle speed in radians per second. - float32 GetJointSpeed() const; - - /// Is the joint limit enabled? - bool IsLimitEnabled() const; - - /// Enable/disable the joint limit. - void EnableLimit(bool flag); - - /// Get the lower joint limit in radians. - float32 GetLowerLimit() const; - - /// Get the upper joint limit in radians. - float32 GetUpperLimit() const; - - /// Set the joint limits in radians. - void SetLimits(float32 lower, float32 upper); - - /// Is the joint motor enabled? - bool IsMotorEnabled() const; - - /// Enable/disable the joint motor. - void EnableMotor(bool flag); - - /// Set the motor speed in radians per second. - void SetMotorSpeed(float32 speed); - - /// Get the motor speed in radians per second. - float32 GetMotorSpeed() const; - - /// Set the maximum motor torque, usually in N-m. - void SetMaxMotorTorque(float32 torque); - float32 GetMaxMotorTorque() const { return m_maxMotorTorque; } - - /// Get the reaction force given the inverse time step. - /// Unit is N. - b2Vec2 GetReactionForce(float32 inv_dt) const override; - - /// Get the reaction torque due to the joint limit given the inverse time step. - /// Unit is N*m. - float32 GetReactionTorque(float32 inv_dt) const override; - - /// Get the current motor torque given the inverse time step. - /// Unit is N*m. - float32 GetMotorTorque(float32 inv_dt) const; - - /// Dump to b2Log. - void Dump() override; - -protected: - - friend class b2Joint; - friend class b2GearJoint; - - b2RevoluteJoint(const b2RevoluteJointDef* def); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - b2Vec3 m_impulse; - float32 m_motorImpulse; - - bool m_enableMotor; - float32 m_maxMotorTorque; - float32 m_motorSpeed; - - bool m_enableLimit; - float32 m_referenceAngle; - float32 m_lowerAngle; - float32 m_upperAngle; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_rA; - b2Vec2 m_rB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - b2Mat33 m_mass; // effective mass for point-to-point constraint. - float32 m_motorMass; // effective mass for motor/limit angular constraint. - b2LimitState m_limitState; -}; - -inline float32 b2RevoluteJoint::GetMotorSpeed() const -{ - return m_motorSpeed; -} - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2RopeJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2RopeJoint.cpp deleted file mode 100644 index 86d27e7..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2RopeJoint.cpp +++ /dev/null @@ -1,241 +0,0 @@ -/* -* Copyright (c) 2007-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2RopeJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - - -// Limit: -// C = norm(pB - pA) - L -// u = (pB - pA) / norm(pB - pA) -// Cdot = dot(u, vB + cross(wB, rB) - vA - cross(wA, rA)) -// J = [-u -cross(rA, u) u cross(rB, u)] -// K = J * invM * JT -// = invMassA + invIA * cross(rA, u)^2 + invMassB + invIB * cross(rB, u)^2 - -b2RopeJoint::b2RopeJoint(const b2RopeJointDef* def) -: b2Joint(def) -{ - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - - m_maxLength = def->maxLength; - - m_mass = 0.0f; - m_impulse = 0.0f; - m_state = e_inactiveLimit; - m_length = 0.0f; -} - -void b2RopeJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - m_u = cB + m_rB - cA - m_rA; - - m_length = m_u.Length(); - - float32 C = m_length - m_maxLength; - if (C > 0.0f) - { - m_state = e_atUpperLimit; - } - else - { - m_state = e_inactiveLimit; - } - - if (m_length > b2_linearSlop) - { - m_u *= 1.0f / m_length; - } - else - { - m_u.SetZero(); - m_mass = 0.0f; - m_impulse = 0.0f; - return; - } - - // Compute effective mass. - float32 crA = b2Cross(m_rA, m_u); - float32 crB = b2Cross(m_rB, m_u); - float32 invMass = m_invMassA + m_invIA * crA * crA + m_invMassB + m_invIB * crB * crB; - - m_mass = invMass != 0.0f ? 1.0f / invMass : 0.0f; - - if (data.step.warmStarting) - { - // Scale the impulse to support a variable time step. - m_impulse *= data.step.dtRatio; - - b2Vec2 P = m_impulse * m_u; - vA -= m_invMassA * P; - wA -= m_invIA * b2Cross(m_rA, P); - vB += m_invMassB * P; - wB += m_invIB * b2Cross(m_rB, P); - } - else - { - m_impulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2RopeJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - // Cdot = dot(u, v + cross(w, r)) - b2Vec2 vpA = vA + b2Cross(wA, m_rA); - b2Vec2 vpB = vB + b2Cross(wB, m_rB); - float32 C = m_length - m_maxLength; - float32 Cdot = b2Dot(m_u, vpB - vpA); - - // Predictive constraint. - if (C < 0.0f) - { - Cdot += data.step.inv_dt * C; - } - - float32 impulse = -m_mass * Cdot; - float32 oldImpulse = m_impulse; - m_impulse = b2Min(0.0f, m_impulse + impulse); - impulse = m_impulse - oldImpulse; - - b2Vec2 P = impulse * m_u; - vA -= m_invMassA * P; - wA -= m_invIA * b2Cross(m_rA, P); - vB += m_invMassB * P; - wB += m_invIB * b2Cross(m_rB, P); - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2RopeJoint::SolvePositionConstraints(const b2SolverData& data) -{ - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - - b2Rot qA(aA), qB(aB); - - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - b2Vec2 u = cB + rB - cA - rA; - - float32 length = u.Normalize(); - float32 C = length - m_maxLength; - - C = b2Clamp(C, 0.0f, b2_maxLinearCorrection); - - float32 impulse = -m_mass * C; - b2Vec2 P = impulse * u; - - cA -= m_invMassA * P; - aA -= m_invIA * b2Cross(rA, P); - cB += m_invMassB * P; - aB += m_invIB * b2Cross(rB, P); - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - - return length - m_maxLength < b2_linearSlop; -} - -b2Vec2 b2RopeJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2RopeJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2RopeJoint::GetReactionForce(float32 inv_dt) const -{ - b2Vec2 F = (inv_dt * m_impulse) * m_u; - return F; -} - -float32 b2RopeJoint::GetReactionTorque(float32 inv_dt) const -{ - B2_NOT_USED(inv_dt); - return 0.0f; -} - -float32 b2RopeJoint::GetMaxLength() const -{ - return m_maxLength; -} - -b2LimitState b2RopeJoint::GetLimitState() const -{ - return m_state; -} - -void b2RopeJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2RopeJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.maxLength = %.15lef;\n", m_maxLength); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2RopeJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2RopeJoint.h deleted file mode 100644 index ef5d6f7..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2RopeJoint.h +++ /dev/null @@ -1,114 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_ROPE_JOINT_H -#define B2_ROPE_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Rope joint definition. This requires two body anchor points and -/// a maximum lengths. -/// Note: by default the connected objects will not collide. -/// see collideConnected in b2JointDef. -struct b2RopeJointDef : public b2JointDef -{ - b2RopeJointDef() - { - type = e_ropeJoint; - localAnchorA.Set(-1.0f, 0.0f); - localAnchorB.Set(1.0f, 0.0f); - maxLength = 0.0f; - } - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The maximum length of the rope. - /// Warning: this must be larger than b2_linearSlop or - /// the joint will have no effect. - float32 maxLength; -}; - -/// A rope joint enforces a maximum distance between two points -/// on two bodies. It has no other effect. -/// Warning: if you attempt to change the maximum length during -/// the simulation you will get some non-physical behavior. -/// A model that would allow you to dynamically modify the length -/// would have some sponginess, so I chose not to implement it -/// that way. See b2DistanceJoint if you want to dynamically -/// control length. -class b2RopeJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// The local anchor point relative to bodyA's origin. - const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; } - - /// The local anchor point relative to bodyB's origin. - const b2Vec2& GetLocalAnchorB() const { return m_localAnchorB; } - - /// Set/Get the maximum length of the rope. - void SetMaxLength(float32 length) { m_maxLength = length; } - float32 GetMaxLength() const; - - b2LimitState GetLimitState() const; - - /// Dump joint to dmLog - void Dump() override; - -protected: - - friend class b2Joint; - b2RopeJoint(const b2RopeJointDef* data); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - float32 m_maxLength; - float32 m_length; - float32 m_impulse; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_u; - b2Vec2 m_rA; - b2Vec2 m_rB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - float32 m_mass; - b2LimitState m_state; -}; - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2WeldJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2WeldJoint.cpp deleted file mode 100644 index b10cee8..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2WeldJoint.cpp +++ /dev/null @@ -1,344 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2WeldJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Point-to-point constraint -// C = p2 - p1 -// Cdot = v2 - v1 -// = v2 + cross(w2, r2) - v1 - cross(w1, r1) -// J = [-I -r1_skew I r2_skew ] -// Identity used: -// w k % (rx i + ry j) = w * (-ry i + rx j) - -// Angle constraint -// C = angle2 - angle1 - referenceAngle -// Cdot = w2 - w1 -// J = [0 0 -1 0 0 1] -// K = invI1 + invI2 - -void b2WeldJointDef::Initialize(b2Body* bA, b2Body* bB, const b2Vec2& anchor) -{ - bodyA = bA; - bodyB = bB; - localAnchorA = bodyA->GetLocalPoint(anchor); - localAnchorB = bodyB->GetLocalPoint(anchor); - referenceAngle = bodyB->GetAngle() - bodyA->GetAngle(); -} - -b2WeldJoint::b2WeldJoint(const b2WeldJointDef* def) -: b2Joint(def) -{ - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - m_referenceAngle = def->referenceAngle; - m_frequencyHz = def->frequencyHz; - m_dampingRatio = def->dampingRatio; - - m_impulse.SetZero(); -} - -void b2WeldJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - m_rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - m_rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - // J = [-I -r1_skew I r2_skew] - // [ 0 -1 0 1] - // r_skew = [-ry; rx] - - // Matlab - // K = [ mA+r1y^2*iA+mB+r2y^2*iB, -r1y*iA*r1x-r2y*iB*r2x, -r1y*iA-r2y*iB] - // [ -r1y*iA*r1x-r2y*iB*r2x, mA+r1x^2*iA+mB+r2x^2*iB, r1x*iA+r2x*iB] - // [ -r1y*iA-r2y*iB, r1x*iA+r2x*iB, iA+iB] - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - b2Mat33 K; - K.ex.x = mA + mB + m_rA.y * m_rA.y * iA + m_rB.y * m_rB.y * iB; - K.ey.x = -m_rA.y * m_rA.x * iA - m_rB.y * m_rB.x * iB; - K.ez.x = -m_rA.y * iA - m_rB.y * iB; - K.ex.y = K.ey.x; - K.ey.y = mA + mB + m_rA.x * m_rA.x * iA + m_rB.x * m_rB.x * iB; - K.ez.y = m_rA.x * iA + m_rB.x * iB; - K.ex.z = K.ez.x; - K.ey.z = K.ez.y; - K.ez.z = iA + iB; - - if (m_frequencyHz > 0.0f) - { - K.GetInverse22(&m_mass); - - float32 invM = iA + iB; - float32 m = invM > 0.0f ? 1.0f / invM : 0.0f; - - float32 C = aB - aA - m_referenceAngle; - - // Frequency - float32 omega = 2.0f * b2_pi * m_frequencyHz; - - // Damping coefficient - float32 d = 2.0f * m * m_dampingRatio * omega; - - // Spring stiffness - float32 k = m * omega * omega; - - // magic formulas - float32 h = data.step.dt; - m_gamma = h * (d + h * k); - m_gamma = m_gamma != 0.0f ? 1.0f / m_gamma : 0.0f; - m_bias = C * h * k * m_gamma; - - invM += m_gamma; - m_mass.ez.z = invM != 0.0f ? 1.0f / invM : 0.0f; - } - else if (K.ez.z == 0.0f) - { - K.GetInverse22(&m_mass); - m_gamma = 0.0f; - m_bias = 0.0f; - } - else - { - K.GetSymInverse33(&m_mass); - m_gamma = 0.0f; - m_bias = 0.0f; - } - - if (data.step.warmStarting) - { - // Scale impulses to support a variable time step. - m_impulse *= data.step.dtRatio; - - b2Vec2 P(m_impulse.x, m_impulse.y); - - vA -= mA * P; - wA -= iA * (b2Cross(m_rA, P) + m_impulse.z); - - vB += mB * P; - wB += iB * (b2Cross(m_rB, P) + m_impulse.z); - } - else - { - m_impulse.SetZero(); - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2WeldJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - if (m_frequencyHz > 0.0f) - { - float32 Cdot2 = wB - wA; - - float32 impulse2 = -m_mass.ez.z * (Cdot2 + m_bias + m_gamma * m_impulse.z); - m_impulse.z += impulse2; - - wA -= iA * impulse2; - wB += iB * impulse2; - - b2Vec2 Cdot1 = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA); - - b2Vec2 impulse1 = -b2Mul22(m_mass, Cdot1); - m_impulse.x += impulse1.x; - m_impulse.y += impulse1.y; - - b2Vec2 P = impulse1; - - vA -= mA * P; - wA -= iA * b2Cross(m_rA, P); - - vB += mB * P; - wB += iB * b2Cross(m_rB, P); - } - else - { - b2Vec2 Cdot1 = vB + b2Cross(wB, m_rB) - vA - b2Cross(wA, m_rA); - float32 Cdot2 = wB - wA; - b2Vec3 Cdot(Cdot1.x, Cdot1.y, Cdot2); - - b2Vec3 impulse = -b2Mul(m_mass, Cdot); - m_impulse += impulse; - - b2Vec2 P(impulse.x, impulse.y); - - vA -= mA * P; - wA -= iA * (b2Cross(m_rA, P) + impulse.z); - - vB += mB * P; - wB += iB * (b2Cross(m_rB, P) + impulse.z); - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2WeldJoint::SolvePositionConstraints(const b2SolverData& data) -{ - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - - b2Rot qA(aA), qB(aB); - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - - float32 positionError, angularError; - - b2Mat33 K; - K.ex.x = mA + mB + rA.y * rA.y * iA + rB.y * rB.y * iB; - K.ey.x = -rA.y * rA.x * iA - rB.y * rB.x * iB; - K.ez.x = -rA.y * iA - rB.y * iB; - K.ex.y = K.ey.x; - K.ey.y = mA + mB + rA.x * rA.x * iA + rB.x * rB.x * iB; - K.ez.y = rA.x * iA + rB.x * iB; - K.ex.z = K.ez.x; - K.ey.z = K.ez.y; - K.ez.z = iA + iB; - - if (m_frequencyHz > 0.0f) - { - b2Vec2 C1 = cB + rB - cA - rA; - - positionError = C1.Length(); - angularError = 0.0f; - - b2Vec2 P = -K.Solve22(C1); - - cA -= mA * P; - aA -= iA * b2Cross(rA, P); - - cB += mB * P; - aB += iB * b2Cross(rB, P); - } - else - { - b2Vec2 C1 = cB + rB - cA - rA; - float32 C2 = aB - aA - m_referenceAngle; - - positionError = C1.Length(); - angularError = b2Abs(C2); - - b2Vec3 C(C1.x, C1.y, C2); - - b2Vec3 impulse; - if (K.ez.z > 0.0f) - { - impulse = -K.Solve33(C); - } - else - { - b2Vec2 impulse2 = -K.Solve22(C1); - impulse.Set(impulse2.x, impulse2.y, 0.0f); - } - - b2Vec2 P(impulse.x, impulse.y); - - cA -= mA * P; - aA -= iA * (b2Cross(rA, P) + impulse.z); - - cB += mB * P; - aB += iB * (b2Cross(rB, P) + impulse.z); - } - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - - return positionError <= b2_linearSlop && angularError <= b2_angularSlop; -} - -b2Vec2 b2WeldJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2WeldJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2WeldJoint::GetReactionForce(float32 inv_dt) const -{ - b2Vec2 P(m_impulse.x, m_impulse.y); - return inv_dt * P; -} - -float32 b2WeldJoint::GetReactionTorque(float32 inv_dt) const -{ - return inv_dt * m_impulse.z; -} - -void b2WeldJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2WeldJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.referenceAngle = %.15lef;\n", m_referenceAngle); - b2Log(" jd.frequencyHz = %.15lef;\n", m_frequencyHz); - b2Log(" jd.dampingRatio = %.15lef;\n", m_dampingRatio); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2WeldJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2WeldJoint.h deleted file mode 100644 index 81ba235..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2WeldJoint.h +++ /dev/null @@ -1,126 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_WELD_JOINT_H -#define B2_WELD_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Weld joint definition. You need to specify local anchor points -/// where they are attached and the relative body angle. The position -/// of the anchor points is important for computing the reaction torque. -struct b2WeldJointDef : public b2JointDef -{ - b2WeldJointDef() - { - type = e_weldJoint; - localAnchorA.Set(0.0f, 0.0f); - localAnchorB.Set(0.0f, 0.0f); - referenceAngle = 0.0f; - frequencyHz = 0.0f; - dampingRatio = 0.0f; - } - - /// Initialize the bodies, anchors, and reference angle using a world - /// anchor point. - void Initialize(b2Body* bodyA, b2Body* bodyB, const b2Vec2& anchor); - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The bodyB angle minus bodyA angle in the reference state (radians). - float32 referenceAngle; - - /// The mass-spring-damper frequency in Hertz. Rotation only. - /// Disable softness with a value of 0. - float32 frequencyHz; - - /// The damping ratio. 0 = no damping, 1 = critical damping. - float32 dampingRatio; -}; - -/// A weld joint essentially glues two bodies together. A weld joint may -/// distort somewhat because the island constraint solver is approximate. -class b2WeldJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// The local anchor point relative to bodyA's origin. - const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; } - - /// The local anchor point relative to bodyB's origin. - const b2Vec2& GetLocalAnchorB() const { return m_localAnchorB; } - - /// Get the reference angle. - float32 GetReferenceAngle() const { return m_referenceAngle; } - - /// Set/get frequency in Hz. - void SetFrequency(float32 hz) { m_frequencyHz = hz; } - float32 GetFrequency() const { return m_frequencyHz; } - - /// Set/get damping ratio. - void SetDampingRatio(float32 ratio) { m_dampingRatio = ratio; } - float32 GetDampingRatio() const { return m_dampingRatio; } - - /// Dump to b2Log - void Dump() override; - -protected: - - friend class b2Joint; - - b2WeldJoint(const b2WeldJointDef* def); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - float32 m_frequencyHz; - float32 m_dampingRatio; - float32 m_bias; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - float32 m_referenceAngle; - float32 m_gamma; - b2Vec3 m_impulse; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_rA; - b2Vec2 m_rB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - b2Mat33 m_mass; -}; - -#endif diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2WheelJoint.cpp b/Source/3rdParty/Box2D/Dynamics/Joints/b2WheelJoint.cpp deleted file mode 100644 index a95311e..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2WheelJoint.cpp +++ /dev/null @@ -1,456 +0,0 @@ -/* -* Copyright (c) 2006-2007 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#include "Box2D/Dynamics/Joints/b2WheelJoint.h" -#include "Box2D/Dynamics/b2Body.h" -#include "Box2D/Dynamics/b2TimeStep.h" - -// Linear constraint (point-to-line) -// d = pB - pA = xB + rB - xA - rA -// C = dot(ay, d) -// Cdot = dot(d, cross(wA, ay)) + dot(ay, vB + cross(wB, rB) - vA - cross(wA, rA)) -// = -dot(ay, vA) - dot(cross(d + rA, ay), wA) + dot(ay, vB) + dot(cross(rB, ay), vB) -// J = [-ay, -cross(d + rA, ay), ay, cross(rB, ay)] - -// Spring linear constraint -// C = dot(ax, d) -// Cdot = = -dot(ax, vA) - dot(cross(d + rA, ax), wA) + dot(ax, vB) + dot(cross(rB, ax), vB) -// J = [-ax -cross(d+rA, ax) ax cross(rB, ax)] - -// Motor rotational constraint -// Cdot = wB - wA -// J = [0 0 -1 0 0 1] - -void b2WheelJointDef::Initialize(b2Body* bA, b2Body* bB, const b2Vec2& anchor, const b2Vec2& axis) -{ - bodyA = bA; - bodyB = bB; - localAnchorA = bodyA->GetLocalPoint(anchor); - localAnchorB = bodyB->GetLocalPoint(anchor); - localAxisA = bodyA->GetLocalVector(axis); -} - -b2WheelJoint::b2WheelJoint(const b2WheelJointDef* def) -: b2Joint(def) -{ - m_localAnchorA = def->localAnchorA; - m_localAnchorB = def->localAnchorB; - m_localXAxisA = def->localAxisA; - m_localYAxisA = b2Cross(1.0f, m_localXAxisA); - - m_mass = 0.0f; - m_impulse = 0.0f; - m_motorMass = 0.0f; - m_motorImpulse = 0.0f; - m_springMass = 0.0f; - m_springImpulse = 0.0f; - - m_maxMotorTorque = def->maxMotorTorque; - m_motorSpeed = def->motorSpeed; - m_enableMotor = def->enableMotor; - - m_frequencyHz = def->frequencyHz; - m_dampingRatio = def->dampingRatio; - - m_bias = 0.0f; - m_gamma = 0.0f; - - m_ax.SetZero(); - m_ay.SetZero(); -} - -void b2WheelJoint::InitVelocityConstraints(const b2SolverData& data) -{ - m_indexA = m_bodyA->m_islandIndex; - m_indexB = m_bodyB->m_islandIndex; - m_localCenterA = m_bodyA->m_sweep.localCenter; - m_localCenterB = m_bodyB->m_sweep.localCenter; - m_invMassA = m_bodyA->m_invMass; - m_invMassB = m_bodyB->m_invMass; - m_invIA = m_bodyA->m_invI; - m_invIB = m_bodyB->m_invI; - - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - b2Rot qA(aA), qB(aB); - - // Compute the effective masses. - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - b2Vec2 d = cB + rB - cA - rA; - - // Point to line constraint - { - m_ay = b2Mul(qA, m_localYAxisA); - m_sAy = b2Cross(d + rA, m_ay); - m_sBy = b2Cross(rB, m_ay); - - m_mass = mA + mB + iA * m_sAy * m_sAy + iB * m_sBy * m_sBy; - - if (m_mass > 0.0f) - { - m_mass = 1.0f / m_mass; - } - } - - // Spring constraint - m_springMass = 0.0f; - m_bias = 0.0f; - m_gamma = 0.0f; - if (m_frequencyHz > 0.0f) - { - m_ax = b2Mul(qA, m_localXAxisA); - m_sAx = b2Cross(d + rA, m_ax); - m_sBx = b2Cross(rB, m_ax); - - float32 invMass = mA + mB + iA * m_sAx * m_sAx + iB * m_sBx * m_sBx; - - if (invMass > 0.0f) - { - m_springMass = 1.0f / invMass; - - float32 C = b2Dot(d, m_ax); - - // Frequency - float32 omega = 2.0f * b2_pi * m_frequencyHz; - - // Damping coefficient - float32 damp = 2.0f * m_springMass * m_dampingRatio * omega; - - // Spring stiffness - float32 k = m_springMass * omega * omega; - - // magic formulas - float32 h = data.step.dt; - m_gamma = h * (damp + h * k); - if (m_gamma > 0.0f) - { - m_gamma = 1.0f / m_gamma; - } - - m_bias = C * h * k * m_gamma; - - m_springMass = invMass + m_gamma; - if (m_springMass > 0.0f) - { - m_springMass = 1.0f / m_springMass; - } - } - } - else - { - m_springImpulse = 0.0f; - } - - // Rotational motor - if (m_enableMotor) - { - m_motorMass = iA + iB; - if (m_motorMass > 0.0f) - { - m_motorMass = 1.0f / m_motorMass; - } - } - else - { - m_motorMass = 0.0f; - m_motorImpulse = 0.0f; - } - - if (data.step.warmStarting) - { - // Account for variable time step. - m_impulse *= data.step.dtRatio; - m_springImpulse *= data.step.dtRatio; - m_motorImpulse *= data.step.dtRatio; - - b2Vec2 P = m_impulse * m_ay + m_springImpulse * m_ax; - float32 LA = m_impulse * m_sAy + m_springImpulse * m_sAx + m_motorImpulse; - float32 LB = m_impulse * m_sBy + m_springImpulse * m_sBx + m_motorImpulse; - - vA -= m_invMassA * P; - wA -= m_invIA * LA; - - vB += m_invMassB * P; - wB += m_invIB * LB; - } - else - { - m_impulse = 0.0f; - m_springImpulse = 0.0f; - m_motorImpulse = 0.0f; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -void b2WheelJoint::SolveVelocityConstraints(const b2SolverData& data) -{ - float32 mA = m_invMassA, mB = m_invMassB; - float32 iA = m_invIA, iB = m_invIB; - - b2Vec2 vA = data.velocities[m_indexA].v; - float32 wA = data.velocities[m_indexA].w; - b2Vec2 vB = data.velocities[m_indexB].v; - float32 wB = data.velocities[m_indexB].w; - - // Solve spring constraint - { - float32 Cdot = b2Dot(m_ax, vB - vA) + m_sBx * wB - m_sAx * wA; - float32 impulse = -m_springMass * (Cdot + m_bias + m_gamma * m_springImpulse); - m_springImpulse += impulse; - - b2Vec2 P = impulse * m_ax; - float32 LA = impulse * m_sAx; - float32 LB = impulse * m_sBx; - - vA -= mA * P; - wA -= iA * LA; - - vB += mB * P; - wB += iB * LB; - } - - // Solve rotational motor constraint - { - float32 Cdot = wB - wA - m_motorSpeed; - float32 impulse = -m_motorMass * Cdot; - - float32 oldImpulse = m_motorImpulse; - float32 maxImpulse = data.step.dt * m_maxMotorTorque; - m_motorImpulse = b2Clamp(m_motorImpulse + impulse, -maxImpulse, maxImpulse); - impulse = m_motorImpulse - oldImpulse; - - wA -= iA * impulse; - wB += iB * impulse; - } - - // Solve point to line constraint - { - float32 Cdot = b2Dot(m_ay, vB - vA) + m_sBy * wB - m_sAy * wA; - float32 impulse = -m_mass * Cdot; - m_impulse += impulse; - - b2Vec2 P = impulse * m_ay; - float32 LA = impulse * m_sAy; - float32 LB = impulse * m_sBy; - - vA -= mA * P; - wA -= iA * LA; - - vB += mB * P; - wB += iB * LB; - } - - data.velocities[m_indexA].v = vA; - data.velocities[m_indexA].w = wA; - data.velocities[m_indexB].v = vB; - data.velocities[m_indexB].w = wB; -} - -bool b2WheelJoint::SolvePositionConstraints(const b2SolverData& data) -{ - b2Vec2 cA = data.positions[m_indexA].c; - float32 aA = data.positions[m_indexA].a; - b2Vec2 cB = data.positions[m_indexB].c; - float32 aB = data.positions[m_indexB].a; - - b2Rot qA(aA), qB(aB); - - b2Vec2 rA = b2Mul(qA, m_localAnchorA - m_localCenterA); - b2Vec2 rB = b2Mul(qB, m_localAnchorB - m_localCenterB); - b2Vec2 d = (cB - cA) + rB - rA; - - b2Vec2 ay = b2Mul(qA, m_localYAxisA); - - float32 sAy = b2Cross(d + rA, ay); - float32 sBy = b2Cross(rB, ay); - - float32 C = b2Dot(d, ay); - - float32 k = m_invMassA + m_invMassB + m_invIA * m_sAy * m_sAy + m_invIB * m_sBy * m_sBy; - - float32 impulse; - if (k != 0.0f) - { - impulse = - C / k; - } - else - { - impulse = 0.0f; - } - - b2Vec2 P = impulse * ay; - float32 LA = impulse * sAy; - float32 LB = impulse * sBy; - - cA -= m_invMassA * P; - aA -= m_invIA * LA; - cB += m_invMassB * P; - aB += m_invIB * LB; - - data.positions[m_indexA].c = cA; - data.positions[m_indexA].a = aA; - data.positions[m_indexB].c = cB; - data.positions[m_indexB].a = aB; - - return b2Abs(C) <= b2_linearSlop; -} - -b2Vec2 b2WheelJoint::GetAnchorA() const -{ - return m_bodyA->GetWorldPoint(m_localAnchorA); -} - -b2Vec2 b2WheelJoint::GetAnchorB() const -{ - return m_bodyB->GetWorldPoint(m_localAnchorB); -} - -b2Vec2 b2WheelJoint::GetReactionForce(float32 inv_dt) const -{ - return inv_dt * (m_impulse * m_ay + m_springImpulse * m_ax); -} - -float32 b2WheelJoint::GetReactionTorque(float32 inv_dt) const -{ - return inv_dt * m_motorImpulse; -} - -float32 b2WheelJoint::GetJointTranslation() const -{ - b2Body* bA = m_bodyA; - b2Body* bB = m_bodyB; - - b2Vec2 pA = bA->GetWorldPoint(m_localAnchorA); - b2Vec2 pB = bB->GetWorldPoint(m_localAnchorB); - b2Vec2 d = pB - pA; - b2Vec2 axis = bA->GetWorldVector(m_localXAxisA); - - float32 translation = b2Dot(d, axis); - return translation; -} - -float32 b2WheelJoint::GetJointLinearSpeed() const -{ - b2Body* bA = m_bodyA; - b2Body* bB = m_bodyB; - - b2Vec2 rA = b2Mul(bA->m_xf.q, m_localAnchorA - bA->m_sweep.localCenter); - b2Vec2 rB = b2Mul(bB->m_xf.q, m_localAnchorB - bB->m_sweep.localCenter); - b2Vec2 p1 = bA->m_sweep.c + rA; - b2Vec2 p2 = bB->m_sweep.c + rB; - b2Vec2 d = p2 - p1; - b2Vec2 axis = b2Mul(bA->m_xf.q, m_localXAxisA); - - b2Vec2 vA = bA->m_linearVelocity; - b2Vec2 vB = bB->m_linearVelocity; - float32 wA = bA->m_angularVelocity; - float32 wB = bB->m_angularVelocity; - - float32 speed = b2Dot(d, b2Cross(wA, axis)) + b2Dot(axis, vB + b2Cross(wB, rB) - vA - b2Cross(wA, rA)); - return speed; -} - -float32 b2WheelJoint::GetJointAngle() const -{ - b2Body* bA = m_bodyA; - b2Body* bB = m_bodyB; - return bB->m_sweep.a - bA->m_sweep.a; -} - -float32 b2WheelJoint::GetJointAngularSpeed() const -{ - float32 wA = m_bodyA->m_angularVelocity; - float32 wB = m_bodyB->m_angularVelocity; - return wB - wA; -} - -bool b2WheelJoint::IsMotorEnabled() const -{ - return m_enableMotor; -} - -void b2WheelJoint::EnableMotor(bool flag) -{ - if (flag != m_enableMotor) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_enableMotor = flag; - } -} - -void b2WheelJoint::SetMotorSpeed(float32 speed) -{ - if (speed != m_motorSpeed) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_motorSpeed = speed; - } -} - -void b2WheelJoint::SetMaxMotorTorque(float32 torque) -{ - if (torque != m_maxMotorTorque) - { - m_bodyA->SetAwake(true); - m_bodyB->SetAwake(true); - m_maxMotorTorque = torque; - } -} - -float32 b2WheelJoint::GetMotorTorque(float32 inv_dt) const -{ - return inv_dt * m_motorImpulse; -} - -void b2WheelJoint::Dump() -{ - int32 indexA = m_bodyA->m_islandIndex; - int32 indexB = m_bodyB->m_islandIndex; - - b2Log(" b2WheelJointDef jd;\n"); - b2Log(" jd.bodyA = bodies[%d];\n", indexA); - b2Log(" jd.bodyB = bodies[%d];\n", indexB); - b2Log(" jd.collideConnected = bool(%d);\n", m_collideConnected); - b2Log(" jd.localAnchorA.Set(%.15lef, %.15lef);\n", m_localAnchorA.x, m_localAnchorA.y); - b2Log(" jd.localAnchorB.Set(%.15lef, %.15lef);\n", m_localAnchorB.x, m_localAnchorB.y); - b2Log(" jd.localAxisA.Set(%.15lef, %.15lef);\n", m_localXAxisA.x, m_localXAxisA.y); - b2Log(" jd.enableMotor = bool(%d);\n", m_enableMotor); - b2Log(" jd.motorSpeed = %.15lef;\n", m_motorSpeed); - b2Log(" jd.maxMotorTorque = %.15lef;\n", m_maxMotorTorque); - b2Log(" jd.frequencyHz = %.15lef;\n", m_frequencyHz); - b2Log(" jd.dampingRatio = %.15lef;\n", m_dampingRatio); - b2Log(" joints[%d] = m_world->CreateJoint(&jd);\n", m_index); -} diff --git a/Source/3rdParty/Box2D/Dynamics/Joints/b2WheelJoint.h b/Source/3rdParty/Box2D/Dynamics/Joints/b2WheelJoint.h deleted file mode 100644 index be7ad66..0000000 --- a/Source/3rdParty/Box2D/Dynamics/Joints/b2WheelJoint.h +++ /dev/null @@ -1,216 +0,0 @@ -/* -* Copyright (c) 2006-2011 Erin Catto http://www.box2d.org -* -* This software is provided 'as-is', without any express or implied -* warranty. In no event will the authors be held liable for any damages -* arising from the use of this software. -* Permission is granted to anyone to use this software for any purpose, -* including commercial applications, and to alter it and redistribute it -* freely, subject to the following restrictions: -* 1. The origin of this software must not be misrepresented; you must not -* claim that you wrote the original software. If you use this software -* in a product, an acknowledgment in the product documentation would be -* appreciated but is not required. -* 2. Altered source versions must be plainly marked as such, and must not be -* misrepresented as being the original software. -* 3. This notice may not be removed or altered from any source distribution. -*/ - -#ifndef B2_WHEEL_JOINT_H -#define B2_WHEEL_JOINT_H - -#include "Box2D/Dynamics/Joints/b2Joint.h" - -/// Wheel joint definition. This requires defining a line of -/// motion using an axis and an anchor point. The definition uses local -/// anchor points and a local axis so that the initial configuration -/// can violate the constraint slightly. The joint translation is zero -/// when the local anchor points coincide in world space. Using local -/// anchors and a local axis helps when saving and loading a game. -struct b2WheelJointDef : public b2JointDef -{ - b2WheelJointDef() - { - type = e_wheelJoint; - localAnchorA.SetZero(); - localAnchorB.SetZero(); - localAxisA.Set(1.0f, 0.0f); - enableMotor = false; - maxMotorTorque = 0.0f; - motorSpeed = 0.0f; - frequencyHz = 2.0f; - dampingRatio = 0.7f; - } - - /// Initialize the bodies, anchors, axis, and reference angle using the world - /// anchor and world axis. - void Initialize(b2Body* bodyA, b2Body* bodyB, const b2Vec2& anchor, const b2Vec2& axis); - - /// The local anchor point relative to bodyA's origin. - b2Vec2 localAnchorA; - - /// The local anchor point relative to bodyB's origin. - b2Vec2 localAnchorB; - - /// The local translation axis in bodyA. - b2Vec2 localAxisA; - - /// Enable/disable the joint motor. - bool enableMotor; - - /// The maximum motor torque, usually in N-m. - float32 maxMotorTorque; - - /// The desired motor speed in radians per second. - float32 motorSpeed; - - /// Suspension frequency, zero indicates no suspension - float32 frequencyHz; - - /// Suspension damping ratio, one indicates critical damping - float32 dampingRatio; -}; - -/// A wheel joint. This joint provides two degrees of freedom: translation -/// along an axis fixed in bodyA and rotation in the plane. In other words, it is a point to -/// line constraint with a rotational motor and a linear spring/damper. -/// This joint is designed for vehicle suspensions. -class b2WheelJoint : public b2Joint -{ -public: - b2Vec2 GetAnchorA() const override; - b2Vec2 GetAnchorB() const override; - - b2Vec2 GetReactionForce(float32 inv_dt) const override; - float32 GetReactionTorque(float32 inv_dt) const override; - - /// The local anchor point relative to bodyA's origin. - const b2Vec2& GetLocalAnchorA() const { return m_localAnchorA; } - - /// The local anchor point relative to bodyB's origin. - const b2Vec2& GetLocalAnchorB() const { return m_localAnchorB; } - - /// The local joint axis relative to bodyA. - const b2Vec2& GetLocalAxisA() const { return m_localXAxisA; } - - /// Get the current joint translation, usually in meters. - float32 GetJointTranslation() const; - - /// Get the current joint linear speed, usually in meters per second. - float32 GetJointLinearSpeed() const; - - /// Get the current joint angle in radians. - float32 GetJointAngle() const; - - /// Get the current joint angular speed in radians per second. - float32 GetJointAngularSpeed() const; - - /// Is the joint motor enabled? - bool IsMotorEnabled() const; - - /// Enable/disable the joint motor. - void EnableMotor(bool flag); - - /// Set the motor speed, usually in radians per second. - void SetMotorSpeed(float32 speed); - - /// Get the motor speed, usually in radians per second. - float32 GetMotorSpeed() const; - - /// Set/Get the maximum motor force, usually in N-m. - void SetMaxMotorTorque(float32 torque); - float32 GetMaxMotorTorque() const; - - /// Get the current motor torque given the inverse time step, usually in N-m. - float32 GetMotorTorque(float32 inv_dt) const; - - /// Set/Get the spring frequency in hertz. Setting the frequency to zero disables the spring. - void SetSpringFrequencyHz(float32 hz); - float32 GetSpringFrequencyHz() const; - - /// Set/Get the spring damping ratio - void SetSpringDampingRatio(float32 ratio); - float32 GetSpringDampingRatio() const; - - /// Dump to b2Log - void Dump() override; - -protected: - - friend class b2Joint; - b2WheelJoint(const b2WheelJointDef* def); - - void InitVelocityConstraints(const b2SolverData& data) override; - void SolveVelocityConstraints(const b2SolverData& data) override; - bool SolvePositionConstraints(const b2SolverData& data) override; - - float32 m_frequencyHz; - float32 m_dampingRatio; - - // Solver shared - b2Vec2 m_localAnchorA; - b2Vec2 m_localAnchorB; - b2Vec2 m_localXAxisA; - b2Vec2 m_localYAxisA; - - float32 m_impulse; - float32 m_motorImpulse; - float32 m_springImpulse; - - float32 m_maxMotorTorque; - float32 m_motorSpeed; - bool m_enableMotor; - - // Solver temp - int32 m_indexA; - int32 m_indexB; - b2Vec2 m_localCenterA; - b2Vec2 m_localCenterB; - float32 m_invMassA; - float32 m_invMassB; - float32 m_invIA; - float32 m_invIB; - - b2Vec2 m_ax, m_ay; - float32 m_sAx, m_sBx; - float32 m_sAy, m_sBy; - - float32 m_mass; - float32 m_motorMass; - float32 m_springMass; - - float32 m_bias; - float32 m_gamma; -}; - -inline float32 b2WheelJoint::GetMotorSpeed() const -{ - return m_motorSpeed; -} - -inline float32 b2WheelJoint::GetMaxMotorTorque() const -{ - return m_maxMotorTorque; -} - -inline void b2WheelJoint::SetSpringFrequencyHz(float32 hz) -{ - m_frequencyHz = hz; -} - -inline float32 b2WheelJoint::GetSpringFrequencyHz() const -{ - return m_frequencyHz; -} - -inline void b2WheelJoint::SetSpringDampingRatio(float32 ratio) -{ - m_dampingRatio = ratio; -} - -inline float32 b2WheelJoint::GetSpringDampingRatio() const -{ - return m_dampingRatio; -} - -#endif |