1 files changed, 42 insertions, 0 deletions
diff --git a/Data/DefaultContent/Libraries/addons/addons/position_manager/README.md b/Data/DefaultContent/Libraries/addons/addons/position_manager/README.md
new file mode 100644
index 0000000..d695b64
--- /dev/null
+++ b/Data/DefaultContent/Libraries/addons/addons/position_manager/README.md
@@ -0,0 +1,42 @@
+# Position Manager
+
+Set and save screen position per-character. Requires the WinControl addon.  
+
+Commands:  
+`//pm set <pos_x> <pos_y> [name]`  
+`//pm size <width> <height> [name]`  
+`//pm size reset [name]`  
+
+`pos_x`, `pos_y`, `width` and `height` are obligatory and must be numbers.  
+`size reset` will restore the original windows size for that character (as specified in the Windower profile).  
+`name` is optional. If no name is provided, settings will be saved for the current character.  
+`:all` is a special name that can be used to set the default position.  
+
+**Note**: Characters are only moved or resized after they're logged in. The `:all` position will be used for the character login screen as well.
+
+**Note**: On some systems with very fast or very slow disks, it can happen that the `WinControl` addon does not get loaded in time for `position_manager` to send the proper command. In that case, you can use this command:  
+`//pm delay <seconds> [name]`  
+(where `seconds` is obligatory and must be a positive number, and `name` follows the same rules as before), to set a delay that will hopefully let the plugin load in time.
+
+### Examples:  
+`//pm set 0 0`  
+Will set your _current_ character to the position X: 0, Y: 0.
+
+`//pm set 0 60 :all`  
+Will set the default positioning for all characters to X: 0 and Y: 60 (the height of the Windows 10 taskbar with 150% UI scaling.), and delete all other character-specific settings.  
+
+`//pm set 1920 0 Yourname`  
+Will set the default position for the character called "Yourname" to X: 1920 and Y: 0.  
+This will make the character appear on the secondary screen that is to the right of the main screen - useful for multi-screen setups.
+
+`//pm set delay 1 all`  
+`//pm set 0 40 Yourman`  
+`//pm set 800 40 Youralt`  
+Will set delay to 1 for all characters, then set the position of your main to X: 0, Y: 40, and your alt to X: 800, Y: 40.  
+If your laptop screen is 1600px wide, and your instances are both set at 800x600, this will put them side by side.
+
+**Warning:** the `all` name will delete every other character-specific settings that are already saved! It's best to use it only once after you install the addon, to set default position and delay for non-specified characters.
+
+IPC is supported. Setting a character's position or size from another character's window, will cause the affected character to update automatically.
+
+Enjoy.